hmmm.....havent really decided what to do yet, might turn out to be another worklog, which i'll build a new casing from scratch with all the cool displays and cooling mods as well

anyway, i've modded some of the cooling heatsinks on my naked rig i'm using

- cut, chop and installed a low profile, Cool Jag 1U (K7) heatsink on my hot NF4 chipset
- mod XP-90C on X1900XTX
- mod and installed a heatsink on CPU


the X1900XTX i'm using is really really hot even with the ICEQ3 (if not mistaken).....the temperature will shoot up to 70-80°C easily during gaming.......so got to do something about it......

then comes the huge heatsink in the middle (try to guess what heatsink is that)

so finally i decided to transfer the XP-90C from the CPU to GPU after i've assembled the heatsink in the middle....


so enjoy the pics.......fabricated the acrylic bracket to hold down the heatsink to the graphics card firmly.....

the heatsink is more than 590g with fan....it's really really heavy....












just compare the size of the heatsink !

just imagine those high end cards are capable of generating heat like a processor and yet the heatsink size is so small..........



This post has been edited by AllnGap: Aug 13 2007, 11:13 PM

below that row of heatsink is the VRM of the card.....gets hot easily.....
do you think that the heatsinks on the rams and VRMs are all copper ??

think again !! they're not !!
just normal aluminum coated in copper-like colour



that area must be active cooled somehow, so i've thought of mounting a 60mm NMB to blow on that part.....perhaps add some blings





size comparison between 92mm and 60mm........the 92mm is really nasty isnt it ?





moving on to the NF4 chipset cooler.....a chunk of copper heatsink got victimized by me.....
trimmed a corner as well as reduced a section of the heatsink to prevent contact with the components on board.....



This post has been edited by AllnGap: Aug 13 2007, 11:19 PM

this heatsink is actually the CoolerMaster Gemin II heatsink......i sort of removed the bracket of the heatsink to fit in on my board because the socket orientation isnt gonna suit my setup.....

the actual size of the heatsink is just exactly the size of 2pcs of 92mm together.......quite impressive heatsink i'd say.....able to run fanless on a naked rig below 43°C on my opty 146

the rams area will be fitted with custom made ram coolers as well as some minor lightings....

as you can see in the picture, the heatsink is really restrictive to the graphics card and chipset area.....my original plan was to stick a Hyper TX (AMD) onto my chipset......but unfortunately, there are no space left at the chipset area....so too bad.......wanna show off to those guys using Noctua U6 but didnt have the opportunity to do so







the heatpipe lies directly on top of the PCI slots, just around 2mm of clearance.....just imagine how IFX-14 on 8800Ultra will look like




this is what i call as a really close one....too close to be safe.....and i had not really measured when i bought that heatsink.....

just 1 or 2mm and the fins will be touching the rear bracket of the graphics card




the in the heatsink can fit a 40mm fan with 20mm thickness, i've tried it and it lowers the load temperature by around 2°C.......aha







shots taken from the top.....kinda scary to look at huge chunks of metal and copper on electronics stuff isnt it ?



This post has been edited by AllnGap: Aug 13 2007, 11:34 PM

wokies........how to put this......got something really interesting here.....

this is a 10.4" LCD running on 12V DC, it has got multiple channel inputs such as S-VIDEO and VGA......and a touch screen in front (but not gonna use)

right now still thinking how to implement this screen to my new casing (perhaps)

might wire it up to ASTRO and a few webcams (aiming at the pool area ) so can switch channel between ASTRO, webcams, VGA






wokies, thats all for now.......

will update more once i start planning and modding again

This post has been edited by AllnGap: Aug 13 2007, 11:40 PM

nicely done dude
from what i saw i think u don have any work until came out that idea

Whoooooooooo.......... I wud love to haf that touchscreen man. then I will do a 2nd input device for flight sim games so all the cockpit meters, controls can be used on the touchscreen. Coolness.

This post has been edited by ianho: Aug 14 2007, 12:05 AM

hmmm .. I wonder how does the cooler work on X1900XTX only ..

how much it could brings down the temperature of the card .....

i dint check the temperature before i modded, but right now on full load it's just near to 50°C.......

and the rams as well as the VRM area is not actively cooled as well....

just imagine how cool your card will be if the cooling system is as effective as the normal cpu cooler would perform

This post has been edited by AllnGap: Aug 14 2007, 12:21 AM

ya! tats nice when playing flight sim

hmm...around a 20~30 drop

Uncle,do you play flight sim 04'...?

Walao a touch screen LCD huh! dam i wiwsh i could do It!

so fun too see those big heatsink, but i saw some artical saying big heatsink arn't good, it will bend ur rig attached to it....

it is still ok if u juz put ur mobo on the table

how is the temp of the gpu after change to xp-90c?

Waa .. your X1900XTX got 10 KGs ?

wao nice air cooling. but quite heavy...

This post has been edited by cofe23: Aug 18 2007, 02:50 AM

when ur done and dont wan ur rig. pls put in the auction. sure ppl wan and will pay high price because its 1 in a million

Ya, I wonder what happened to his last rig..the iCute..

eh, AnG, you the card (X1900XTX) at 2nd PCI-e, would it run at 8x? does it affect the performance?

lolz... the LCD u place at the front of the casing? the display clear? how much it cost?