My main concern with e-SIM is I cant switch phone easily.
Sadly the border is closed this year else I will get the dual-sim slot variant from HK.
[2020]iPhone 12 Pro/Pro Max Discussion Thread | V1, It’s a leap year.
[2020]iPhone 12 Pro/Pro Max Discussion Thread | V1, It’s a leap year.
|
|
Oct 14 2020, 04:31 PM
Return to original view | Post
#1
|
|
Elite
8,396 posts Joined: Jul 2008 |
My main concern with e-SIM is I cant switch phone easily.
Sadly the border is closed this year else I will get the dual-sim slot variant from HK. |
|
|
|
|
|
Oct 15 2020, 01:14 PM
Return to original view | Post
#2
|
|
Elite
8,396 posts Joined: Jul 2008 |
QUOTE(Mavik @ Oct 15 2020, 11:41 AM) no, stuck with esim and I completely forgot that I had an esim until I read this thread since last year around November. No issues faced at all. What about if you lost your phone, or the phone is being repaired. Are you able to quickly provision a physical SIM quickly at the kiosk?If the phone is wiped or reset, do I need to go to the carrier and provision an eSIM again? Appreciate your clarification. QUOTE(cyberic @ Oct 15 2020, 01:07 PM) 5G mmWave is only supported on US models.This post has been edited by blacktubi: Oct 15 2020, 01:15 PM |
|
|
Oct 15 2020, 01:27 PM
Return to original view | Post
#3
|
|
Elite
8,396 posts Joined: Jul 2008 |
QUOTE(vez @ Oct 15 2020, 01:21 PM) esim doubts... Thanks for the info. This clear up all my concerns on eSIM.when you wipe/reset iPhone, it will ask you whether want to remove esim profile i tried remove esim profile when reset, after that I use back the same qr code is okay, but what I did not test is when changing phone been using Xs with maxis esim and til 11 pro, Maxis told me cannot reuse when I got my 11 pro at maxis center, so i use the new qr code maxis provided for new 11 pro last year I do believe qr code can reuse, but i unsure whether is carrier lock it or not I have few travel esim profile which i attached to my iPhone Xs, when I got my 11 pro, only maxis esim I scan the new one, the other two travel esim profile I use my 11 pro rescan no issue, and can be use oversea last year. So, esim still have some doubts like, when phone spoilt, send for warranty etc.... how to use it on spare phone, in the case even your spare phone have to support esim best is local sim card using physical sim... I will prefer to use eSIM as the main SIM as it's easier to get a physical travel SIM when travelling overseas. Now I need to find out is it possible to get a physical SIM from the Maxis ATM kiosk in the rare situation where I need one once I switched to eSIM. |
|
|
Oct 15 2020, 01:46 PM
Return to original view | Post
#4
|
|
Elite
8,396 posts Joined: Jul 2008 |
QUOTE(vez @ Oct 15 2020, 01:32 PM) the only telco i know can immediately generate qr code for new/replacement is yoodo So, it's possible to purchase the eSIM and just use it once landed? Definitely a huge plus to eSIM for the convenience.other telco should have follow.... else current covid situation, we dont know any time CMCO... MCO... comes else it will be troublesome getting a replacement esim qr code when something goes wrong actually travel sim nowadays a lot go E, the esim package seems reasonable, even for the local country plan, you may look at here to find one if needed https://esimdb.com/ just that some travel esim profile need to pay (like USD2) a fees to get the esim qr code without any plan I am still doing the old school way by going to the airport kiosk upon landing. Are you able to have dual eSIM standby on your current iPhone? |
|
|
Oct 15 2020, 03:09 PM
Return to original view | Post
#5
|
|
Elite
8,396 posts Joined: Jul 2008 |
QUOTE(TOMEI-R @ Oct 15 2020, 03:05 PM) Everyone of us is still using the old school way of buying a physical sim at the airport upon landing. That is why I'm on the physical dual sim Iphone from HK. On whether you would be able to purchase an ESim and use it once landed will depend on that particular telco. You would still need to be connected to the internet first upon landing before you receive your E-Sim. So I still think physical sim would still be the easier and faster method. Where do you get the HK model in Malaysia?Dual ESim standby is possible on the current iphones. IINM you can have up to 7 different Esims stored on your phone at any time. Couldn't travel now due to COVID and based on my experience, the first batch is always hard to get in HK due to scalpers from PRC. |
|
|
Oct 15 2020, 10:02 PM
Return to original view | Post
#6
|
|
Elite
8,396 posts Joined: Jul 2008 |
QUOTE(swanlover @ Oct 15 2020, 08:08 PM) mmWave is really costly to roll out as it requires a ton of base station to be built. Not to mention the entire infrastructure stack is non-existent.There will be certain spot with mmWave just for telco to brag but widespread roll out is unlikely within the next 3 years. Our 4G is not even up to global standards like Taiwan or Korea. |
|
|
|
|
|
Oct 16 2020, 12:32 PM
Return to original view | Post
#7
|
|
Elite
8,396 posts Joined: Jul 2008 |
Still kinda torn between the 12 Pro and 12 Pro Max.
I want the better camera but the size is too huge. |
|
|
Oct 18 2020, 03:31 PM
Return to original view | Post
#8
|
|
Elite
8,396 posts Joined: Jul 2008 |
Super excited about the return of Qualcomm modem. Intel modem been terrible.
|
|
|
Oct 18 2020, 09:23 PM
Return to original view | Post
#9
|
|
Elite
8,396 posts Joined: Jul 2008 |
|
|
|
Oct 19 2020, 09:36 AM
Return to original view | Post
#10
|
|
Elite
8,396 posts Joined: Jul 2008 |
|
|
|
Oct 20 2020, 02:19 PM
Return to original view | IPv6 | Post
#11
|
|
Elite
8,396 posts Joined: Jul 2008 |
Gold iPhone Attached File(s)
trim.344A94D9_033F_4DB7_BAF8_2199EF93595D.MOV ( 822.12k )
Number of downloads: 191 daimon liked this post
|
|
|
Oct 21 2020, 03:00 PM
Return to original view | Post
#12
|
|
Elite
8,396 posts Joined: Jul 2008 |
|
|
|
Oct 29 2020, 12:00 AM
Return to original view | Post
#13
|
|
Elite
8,396 posts Joined: Jul 2008 |
QUOTE(daimon @ Oct 28 2020, 11:41 PM) lol i try to use ruler draw out the size for iphone 12 pro and pro max The screen aspect ratio is not changed and I am pretty sure that the iPhone 12 Pro Max is a bigger phone than iPhone 11 Pro Max. i realised this new 12 phone are LONGER from top to bottom and thinner(or narrower) from left to right compare to 11 series I wonder why they design it this way? Is to encourage people to watch video by putting it horizontally? iPhone 12 Pro Max 160.8 mm x 78.1 mm x 7.4 mm iPhone 11 Pro Max 158 mm x 77.8 mm x 8.1 mm daimon liked this post
|
|
|
|
|
|
Oct 30 2020, 12:43 PM
Return to original view | Post
#14
|
|
Elite
8,396 posts Joined: Jul 2008 |
PSA: iPhone 12 series charge at 22.5W peak rate. The 20W brick from Apple isn't going to provide the maximum charging rate. I'm going to order another Anker 30W GaN charger this 11.11. J.alexander liked this post
|
|
|
Oct 30 2020, 01:01 PM
Return to original view | Post
#15
|
|
Elite
8,396 posts Joined: Jul 2008 |
|
|
|
Oct 30 2020, 02:21 PM
Return to original view | Post
#16
|
|
Elite
8,396 posts Joined: Jul 2008 |
QUOTE(Area51SE @ Oct 30 2020, 01:16 PM) Yea, it literally popped on the first use which I suspect is due to a capacitor explosion.I guess I'm just unlucky since there will be defective units in any mass production. But it makes me doubt their QC process that let it slipped through. |
|
|
Oct 30 2020, 07:54 PM
Return to original view | IPv6 | Post
#17
|
|
Elite
8,396 posts Joined: Jul 2008 |
QUOTE(rayhvs @ Oct 30 2020, 07:40 PM) Just a stupid question here. If i have power adaptor 18w but its output port is usb. Can i later pair with cable usb to lightning for charging iphone12? Apple only support USB-C PD fast charging.Dont get me wrong. I definitely will buy power adaptor type c later but since i got 1 extra power adaptor usb, so i can keep it in my office as a spare charger. You’ll need a PD USB-C power adapter and the USB-C to lightning cable. |
|
|
Nov 2 2020, 04:29 PM
Return to original view | Post
#18
|
|
Elite
8,396 posts Joined: Jul 2008 |
|
|
|
Nov 3 2020, 02:49 PM
Return to original view | Post
#19
|
|
Elite
8,396 posts Joined: Jul 2008 |
QUOTE(HaN18 @ Nov 3 2020, 02:36 PM) wokay~~~ decided to jump ship from samseng s10+ android to IOS!! What charging brick do you use?looking forward for upcoming ipong 12 max! lets talk about case. any good case are slim and "protective" against drop? and it wont turn yellow in months. so far i found"slim case". really prefer the naked feeling but i scare my screen will crack once i drop. another question, charger. if i use a 100w charger c/w 2 PD and 2 USB will they damage my phone and other stuff? will be charging 2 iphone 12 at the same time and a night lamp + other stuff that can charge. if my night lamp only need 1amp to charge the charger wont overcharge my nightlamp right, i remember 1 forumer said, charging amp and speed is depends on device not the charger. the device draw the power from charger. so even i use 100w charger to charge a LED rechargeable nightlamp it wont be dangerous right? Most decent charging brick will intelligentlly allocate the charging current to each port depending on load. iPhone 12 peak at 23W and I believe your nightlamp is probably just 10W. At full load, it will be 56W and I guess your brick should be able to handle that just fine, perhaps just warmer than usual when both iPhone drawing at full load. Damage is unlikely as the MFi chip in the cable and iPhone charging circuit will prevent that. |
|
|
Nov 5 2020, 12:20 PM
Return to original view | Post
#20
|
|
Elite
8,396 posts Joined: Jul 2008 |
QUOTE(shaniandras2787 @ Nov 5 2020, 12:02 PM) https://discussions.apple.com/thread/250391949 I think it depends on the car.the Apple forum people seems to suggest otherwise though Most USB port for CarPlay charge extremely slowly which shouldn't impact battery health. |
|
Topic ClosedOptions
|
| Change to: | 0.1745sec
0.24
7 queries
GZIP Disabled
Time is now: 27th November 2025 - 06:08 PM |