Here's how the stock Centurion 534 looks like. Sry for the extremely small pic. I forgot to take a pic of the stock case b4 I started modding so I took this pic from the CM site.









1st thing was to make a big side window for it.









Next up was the top 120mm blowhole.









Then it's to the front where I improved the intake with a 120mm front intake fan plate. I made a custom fan plate that occupies 3 rom slots. I also cut 1 of the free rom slots n installed 2 temperature LCDs. I used a Sunbeam 3D fan grill to give it sum bling bling too.





Power on to test the fans n temp LCDs.









Close up of the LCDs. Nice eh? I'm gonna order more of these LCDs for my own usage soon. Gonna add them to my King Kong n GT40 rigs.










Final pic of overall view.



This post has been edited by ianho: Aug 12 2007, 05:42 PM

hmm.. the LCD really looks familiar ...

btw uncle how did u mount it ... ??

Another master piece work .....

The LCDs r from teckhooi's(Project JAWS owner) bulk. Very nice n cheap. Oni rm20.
I cut the rom cover n put the LCDs in the hole. Quite difficult coz the gap between the hole n the LCD frame is oni about 1.5mm. Need to measure 10 times, cut once.

That's why I mount it behind of the cover in my A05 mod .. .

I used hot glue to hold it ...

sorry, what is hot glue??

izzit the glue used to make aquarium??

hot glue = gun glue?
nice work ian..waiting for mine finished nice lcd too itchy to get a pair

can i know where can buy the 2 Lcds ... ?

u can ask forumer here name teckhooi..he selling those lcd

those LCD looks cool... wish to get 1 also to mod my old casing =P

the lcd addition have similarity with the power logic casing

uncle ho, those black frame are original from the LCD display itself ??

wau very nice work, must learn from the master liao

Ya the black frame is the LCD itself. The difficulty is the mounting n cutting of the aluminum rom slot cover. The frame oni has a 1.5mm gap inside to the body of the LCD. So the square hole I had to cut in the aluminum rom slot cover is a square hole which is 1.5mm smaller all around. Absolutely no margin for error. Any errors will show up outside of the frame coz it's just such a teeny weeny gap. They really shud make the body of the LCD smaller so that the mounting holes can be simpler to make. A 5mm gap to the frame wud b so much better. Oh well, I suppose we cant be too picky since the LCD is so cheap at oni rm20 each.