Bios Overclock GA p35-dq6, where is it?
|
|
 Aug 11 2007, 01:55 PM
Return to original view | Post
#1
|
 
Junior Member
302 posts Joined: Jun 2007 From: Johor   
|
QUOTE(bontotalan @ Aug 11 2007, 01:38 AM) Where to overclock my FBU or Multiplier in the bios, i can't seem to find it During start-up....just hit the DEL key. Ctrl+F1 only works when you are in the bios and need to change the ram timings.Do i need to update my BIOS? If so, how since i don't have a floppy  As for bios...i believe urs is F4 bios.....try updating to F5M....It's still beta but its so far the best bios up to date. |
|
|
Aug 11 2007, 02:21 PM
Return to original view | Post
#2
|
|
Junior Member
302 posts Joined: Jun 2007 From: Johor
|
QUOTE(bontotalan @ Aug 11 2007, 02:13 PM) got it thanks, my cpu is now 3.15ghz from 2.4ghz...can go more but i'm afraid I am sure your proc can go higher then that....2.4 to 3.15 is just a mere 700Mhz. But make sure u have good cooling. On air, try to stay below 1.55v. Without good cooling, at 1.55v produce quite a lot of EMI.  ... whats the symptom of it is maxed?Try bumping up the voltages and FSB 3 Mhz at a time...until you reach a sweet spot. |
|
|
Aug 11 2007, 02:52 PM
Return to original view | Post
#3
|
|
Junior Member
302 posts Joined: Jun 2007 From: Johor
|
QUOTE(bontotalan @ Aug 11 2007, 02:29 PM) i set my volatage up to AUTO because i dont know what to put. 54C wat? Idle or load? Whether to go for WC is really up to you. For P35-DQ6, you have to disable C1E and TM2 in bios to maintain your clock speed.current voltage is around 1.38v ------------------------------3.15ghz GA P35-DQ6 Q6600 8800 GTS 320MB Added on August 11, 2007, 2:30 pmdo i need to buy water cooling? my tempreture at 54C Added on August 11, 2007, 2:31 pmjust wanna ask, why does my multiplier go to 6x when idle and 9x when doing something edit again...i already off (disable) my EIST |
|
Topic ClosedOptions
|
| Change to: |  0.0179sec
 0.60
 6 queries
 GZIP Disabled
Time is now: 1st December 2025 - 02:13 AM |
Quote