Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Tyre sizes, WTA

views
     
zeng
post Sep 11 2020, 09:27 PM

Regular
******
Senior Member
1,810 posts

Joined: May 2008
QUOTE(dwRK @ Sep 11 2020, 09:12 PM)
I suspect front is 7.5...rear 8.5... asked ts to check full rim info many times d...

anyways ts wanna avoid 245 because of cost... so for 7.5/8.5, I think only 225 and 235

my big issues are offsets and clearances...so even if can fit 4 identical, might not be able to rotate back to front...and even if no rubbing, every time rotate handling will change
*
Standardising tyre width size to 225 or 235 is fine with 7.5/8.5 J .
TS really wanna to confirm actual rim size is in compliance with 7.5 - 8.5 J .
zeng
post Sep 11 2020, 09:27 PM

Regular
******
Senior Member
1,810 posts

Joined: May 2008
- delete -
Double post .

This post has been edited by zeng: Sep 11 2020, 09:29 PM
zeng
post Sep 12 2020, 12:55 PM

Regular
******
Senior Member
1,810 posts

Joined: May 2008
QUOTE(19 Degree South @ Sep 12 2020, 11:35 AM)
so bro, from 245 to 235 is not a big issue right? E.g from 245/40/18 to 235/40/18. ThinkĀ  TR1 doesnt come in 245.
*
Your front rim is probably of 7.5J size which doesn't quite permit 245 width tyres .
Hence factory original tyre width is 225 mm , where one may 'upgrade' to a 235 mm width tyres for rationalisation .
Your rear rim can accomodate narrower 235 mm width (instead of original 245 mm) and it is fine to 'modify' so , although it may be at an imperceptible slight expense of lower capacity of power/torque transfer aka pick-up power if that doesn't matter to you .

This post has been edited by zeng: Sep 12 2020, 12:57 PM

 

Change to:
| Lo-Fi Version
0.0175sec    0.52    6 queries    GZIP Disabled
Time is now: 1st December 2025 - 02:27 AM