Load the SATA/RAID drivers from floppy

For those who have access to USB floppy drives, here's the step how you want to get XP Setup to detect your SATA harddrive.

1. Attach USB floppy disc
   
2. Copy SATA/RAID drivers to floppy
   
3. Reboot and boot from XP Setup disc
   
4. Look at the bottom of the screen and hit F6 when it says "Press F6 to load blah blah blah"
   
5. A screen will show a list of drivers to load from the floppy which in most case only 1 item in the list
   
6. Select the driver there and XP Setup should be able to detect your hard drive
   
7. Resume XP installation as how you do normally
   

Here's a list of drivers to stop everyone from creating new threads to ask for drivers.

Acer
Aspire 4710 - ftp://ftp1.acer.com.sg/Support/files/Acer.../XPSP2/SATA.exe

Dell
Dell Inspiron 1420 - http://support.ap.dell.com/support/topics/...pup&file=205611

Please be awared that for certain cases, drivers would be the same if it is the same chipset. For example, if Aspire 4710 would be a 965GM chipset and 4720 is also using the same 865GM chipset, the same RAID/SATA drivers could be used to do the installation. If you're not sure, please ask first...

Post or PM me the laptop model here and i'll find for you and do the updating here.