Jul 30 2020, 10:45 AM
QUOTE(UnknownH @ Jul 30 2020, 08:02 AM)
Note that this works only if the t8 led live and neutral at opposite end(L one side, N one side).
Iinm Philips t8 led has L and N on same side. If you want to use Philips, just replace the previous starter with the fake starter that comes with Philips in step 3.
This of course assuming that ballast/choke is magnetic type(the stone, heavy one).
2- not really. Just take out the starter. That's it.
That fake starter Philips is just a wire to connect neutral/live from the other end.
Let's say, if my ballast is dead and i want to use the Philips, can I bypass the ballast and short the wires L and N going into the ballast to the socket (L to one end N to another end)?Iinm Philips t8 led has L and N on same side. If you want to use Philips, just replace the previous starter with the fake starter that comes with Philips in step 3.
This of course assuming that ballast/choke is magnetic type(the stone, heavy one).
2- not really. Just take out the starter. That's it.
That fake starter Philips is just a wire to connect neutral/live from the other end.
Then plug in the fake starter from Philips?
Edited to clarify the question, shorting L and N is no-no for sure
This post has been edited by electron: Jul 30 2020, 11:05 AM
Quote
0.0177sec
1.32
7 queries
GZIP Disabled