Feb 28 2021, 01:39 AM
QUOTE(dijon @ Aug 24 2020, 03:11 PM)
Yes, all working perfectly now as using the Wifi extender at my living hall downstairs (main router on 1st floor) using a LAN port directly connecting a PC desktop ...the speed was ~30Mbps on wireless and now ~80Mbps on wired RJ45 cable connection!
If you used same SSID & password on the Wifi Extender, the devices connected to it may suffer up to 50% slower speed as compared to a direct main router connection. However, it is more convenient as your devices will connect seamlessly to the strongest signal as you move around.
You may try to create a different SSID to check your speed and use the method that gives you the best result.
My preference is always to use wired for non-mobile devices like desktop, laptop, and TV streaming devices (where LAN port is available). Hope this helps too.
A big thank you to delaciox again.. as he provided detailed tips in getting my 'wireless bridge' to work!
Hello Dijon, I have some questionsIf you used same SSID & password on the Wifi Extender, the devices connected to it may suffer up to 50% slower speed as compared to a direct main router connection. However, it is more convenient as your devices will connect seamlessly to the strongest signal as you move around.
You may try to create a different SSID to check your speed and use the method that gives you the best result.
My preference is always to use wired for non-mobile devices like desktop, laptop, and TV streaming devices (where LAN port is available). Hope this helps too.
A big thank you to delaciox again.. as he provided detailed tips in getting my 'wireless bridge' to work!
1. When I go to Network -> WAN Settings, I saw eInternet but there is no edit link, I only saw the view link at the action column. What do I do? I inspected and removed the "disabled" code but there's no way to save it when I tick again the "Enabled VLAN ID". In this same page, the VLAN mode available were Maxis Own Build, Maxis-TM, SACOFA, CTS and TNB-Setia Haruman, which is the correct mode?. Did I do anything wrong?
2. It's confirmed that the Archer C5v that was given by Maxis, it can work as a wireless repeater?
QUOTE(allan1981 @ Jan 24 2021, 07:28 PM)
Hi Dijon,
How to enable VLAN id in Bridge mode? It only have Back button. I try to change the value to Save also not working.
Can you help me on this?
Same issues exactly, but my issue was worse, there's no "Save" button at all.How to enable VLAN id in Bridge mode? It only have Back button. I try to change the value to Save also not working.
Can you help me on this?
Please advise here, gurus, thank you!
Quote
0.0138sec
0.41
7 queries
GZIP Disabled