Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Question about Woofer Ohms and Watts

views
     
fireballs
post Jun 30 2020, 05:48 PM

10101
*******
Senior Member
5,646 posts

Joined: Mar 2012
http://www.bcae1.com/spkrmlti.htm
fireballs
post Jun 30 2020, 06:31 PM

10101
*******
Senior Member
5,646 posts

Joined: Mar 2012
i suppose you are looking at this amp
https://www.lazada.com.my/products/tpa3116d...2981766493.html

go to the datasheet at https://www.ti.com/product/TPA3116D2#produc...tails##features

then you will see its
50+50W at 4ohm

means ngam your application. they mix two channel to form 100W

err what is a subwooffer speaker with dual voice coil?

This post has been edited by fireballs: Jun 30 2020, 06:31 PM
fireballs
post Jun 30 2020, 06:57 PM

10101
*******
Senior Member
5,646 posts

Joined: Mar 2012
https://rockfordfosgate.com/products/details/r2d4-12/
https://manual.kenwood.com/en_contents/atta...load/1000005943


your amplifier price not bad.
https://www.lazada.com.my/products/tpa3116-...1890454052.html

from datasheet should best suited to 2ohm for the 100W max.
https://www.ti.com/product/TPA3116D2#produc...ls##description

so your choice of dual voice coil sub is correct.
one subwoofer is sufficient.

This post has been edited by fireballs: Jun 30 2020, 07:02 PM
fireballs
post Jun 30 2020, 08:13 PM

10101
*******
Senior Member
5,646 posts

Joined: Mar 2012
QUOTE(vinothrao84 @ Jun 30 2020, 07:24 PM)
Thanks for the helpful response bro.

But I'm little confused here. U mentioned 2 ohm.
So that means i need to set subwoofer wiring as 2 ohm? Will the woofer wattage increase coz of 2ohm?
And the 100w from the mini amp will output 2ohm or 4ohm?

Thanks.
*
2ohm means its easier to push, less resistance.
to get your full 100W, you need low ohm and high voltage.
if you use the standard 12V, most likely you wont get full 100W.
recommend to use 24vdc.


 

Change to:
| Lo-Fi Version
0.0156sec    0.37    6 queries    GZIP Disabled
Time is now: 26th November 2025 - 04:36 AM