Item(s): Power brick for Dymo LabelWriter 450

Need identical or compatible replacement for this power brick...



This is very urgent, please PM here or WhatsApp me at +60124845067.

Thank you!

This post has been edited by munchoong: Jun 21 2020, 04:15 PM

just use any 24vdc power supply.
cut the cable and join to the smps
you can get these from lamp shops for led light

sorry didn't understand

actually I am not sure if it's the power cord or the power supply that's damaged, as I do not have a spare power cord for it (it uses a 2-pin cord).

Should I just buy a replacement power cord to test first?

test the 2pin cord first. use any cord from tv radio etc. but unlikely lah.
if fail would be the power supply.

test your power supply with a meter first. check for the 24v

OK, i've ordered a 2pin cord from Shopee...

I don't have a volt meter, so the best I can is just to hope it's just a cord problem and not a problem with the power suppply

har?? look around in your home or office. sure have one.
the cord hardly fail unless tikus or dog bite

all my power cords are the three-pin variety

the LED on the Dymo power supply doesn't light up with the current power cord

if it also doesn't come on with a replacement cord, i will need to look for a new power supply

Dymo doesn't sell replacement parts to Malaysia, and their recommended reseller doesn't answer emails or pickup the phone

Out of warranty?
You can get a 24v power supply for probably rm20
Look for lighting shop or electronic ahop

Their support really sucks... doesn't seem like they care about their Malaysian customers

The label printer is only six months old, and the seller in Shopee that I bought it from is not responding at all so I need to figure this out on my own.

This post has been edited by munchoong: Jun 22 2020, 10:04 AM

example, this is local stock

https://www.lazada.com.my/products/arduino-...AjASEK&search=1

https://www.lazada.com.my/products/dc24v-2a...s141583968.html
other examples

measure the plug size ya.

thank you for all your help... these have been invaluable