Off the main water supply and turn on the tap to drain the balance water. Wipe dry the T area and apply pvc glue around the leak area. Wait for an hour to completely dry and turn on the main. If it stills leak, then change the whole piping to stainless steel.

Sometimes a quality product can defect due to batch production problem or mishandling. If is a repeat, avoid buying a replacement from the same shop.

If is pressure problem, then all T or elbow joints would have the same problem. Your particular problem could be the area is without a pipe clip to hold the pipe and prevent 'vibration' when the pressure water passes through.


This post has been edited by mini orchard: Aug 28 2021, 07:09 AM