Outline ·
[ Standard ] ·
Linear+
Water Pressure Regulator, Where can buy?
|
TSben3003
|
May 26 2020, 03:55 PM, updated 6y ago
|
|
Hi guys, my home current keep having this water hammering issue which i believe is due to high pressure from municipal water supply. This occur especially during late night where water usage for the city is low. And i found out my shower tap is leaking from stem and i believe this may be the cause. Anyone can let me know where can i get this water pressure regulator? I searched at lazada and i not sure is this the thing for my case. I need something tat will maintain the set pressure main supply water pressure.
|
|
|
|
|
|
TSben3003
|
May 27 2020, 01:42 AM
|
|
Ok thanks. Will try and buy 1 when im back at home.
|
|
|
|
|
|
TSben3003
|
May 27 2020, 03:08 PM
|
|
QUOTE(bigred @ May 27 2020, 02:38 PM) I got it from Shopee, link below https://shopee.com.my/product/98755016/1994722148Delivery took nearly two weeks. It was a China supplier. Ordered on 6th May 2020, received on 19th May 2020. So far quite happy with the product. Had a metal filter inside it.  I have attached a table on the DN20 / DN15 measure for easier reference so you know what to buy  did u also facing over pressure from main pipe?
|
|
|
|
|
|
TSben3003
|
May 27 2020, 05:33 PM
|
|
QUOTE(Zot @ May 27 2020, 04:21 PM) The problem you are seeing is too high water pressure. So, you put regulator to reduce pressure. Water hammering is different thing. Nothing to do with water pressure. It is when you close water valve too fast you hear knocking sound because the piping is knocking on object surround it, thus called water hammering. If you gradually close the valve the effect is less pronounced. The solution for thins is something else. I have watter hammering problem in my house. water hammering is due to water pressure too high. it is the cause of what u say the pipe is knocking. the water hammer is when the water pressure high, then u suddenly stop it, the inertia of the water suddenly put to stop it will cause the pipe to move. my worry is also the water output maybe too low but i think if can set to the normal water pressure then it will maintain there shud be fine. cos we just need to regulate the pressure. i dont know these sell online punya is self-regulating pressure regulator or not. 5 barg, if the outlet become less than 5barg, it will open the valve to allow more flow to maintain pressure, but of coz it will just maintain the 5 barg, inside the valve should have a dome or diaphragm. This post has been edited by ben3003: May 27 2020, 05:35 PM
|
|
|
|
|
|
TSben3003
|
May 27 2020, 07:03 PM
|
|
QUOTE(Zot @ May 27 2020, 06:18 PM) Not necessarily. My house pressure is still lower than 4 and it is still hammering  The technique to stopp hammering is different, instead of lowering pressure. that is because the piping itself is already no well supported. i already said, the water hammering is when the inertia of the water like hit the wall when u stop the water flow. then it will shock back to the water and push the pipe, and thus the pipe hit the structure. another way is to create a air buffer, which is to install a pulsation dampener.
|
|
|
|
|