Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Wifi bridge using Unifi router, AC1200

views
     
TSgobliners
post May 26 2020, 10:26 AM, updated 4y ago

Getting Started
**
Junior Member
128 posts

Joined: Dec 2006


Hi,

Im currently using Deco M9 as my main router and i have Unifi issued AC1200 router at dispense. How do i setup wifi bridge on AC1200 to connect to my M9. I wanted to use the Lan port on AC1200 as i have a device without wireless capability. i cant find WDS mode on the unifi router interface and i cant find related guide on the net. appreciate if any sifu could assist.
WongGei
post May 26 2020, 12:04 PM

Regular
******
Senior Member
1,206 posts

Joined: Dec 2007
From: Kuala Lumpur
Ethernet Backhaul? https://www.tp-link.com/us/support/faq/1794/
TSgobliners
post May 26 2020, 03:59 PM

Getting Started
**
Junior Member
128 posts

Joined: Dec 2006


QUOTE(WongGei @ May 26 2020, 12:04 PM)
i have no problem with my deco units, just that im interested to establish wireless network between deco and C1200.
patricktoh
post May 26 2020, 10:43 PM

Casual
***
Junior Member
462 posts

Joined: Jan 2006
From: Kuala Lumpur


QUOTE(gobliners @ May 26 2020, 03:59 PM)
i have no problem with my deco units, just that im interested to establish wireless network between deco and C1200.
*
Flash the C1200 with DD-WRT firmware then setup the router's wireless mode=Client Bridge (Routed). Read the forum

https://forum.dd-wrt.com/wiki/index.php/Installation

I flashed the AC1750 (C7 ver2.0) with DD-WRT and setup client bridge (the picture below). I placed the C7 router in study room wirelessly connected to main router (AC3200) located in living room. There are 1 workstation and 1 notebook LAN connected to the C7.

This post has been edited by patricktoh: May 26 2020, 10:59 PM


Attached thumbnail(s)
Attached Image Attached Image
TSgobliners
post May 27 2020, 08:30 AM

Getting Started
**
Junior Member
128 posts

Joined: Dec 2006


QUOTE(patricktoh @ May 26 2020, 10:43 PM)
Flash the C1200 with DD-WRT firmware then setup the router's wireless mode=Client Bridge (Routed). Read the forum

https://forum.dd-wrt.com/wiki/index.php/Installation

I flashed the AC1750 (C7 ver2.0) with DD-WRT and setup client bridge (the picture below). I placed the C7 router in study room wirelessly connected to main router (AC3200) located in living room. There are 1 workstation and 1 notebook LAN connected to the C7.
*
great! will try this out

 

Change to:
| Lo-Fi Version
0.0124sec    0.22    6 queries    GZIP Disabled
Time is now: 29th March 2024 - 12:16 AM