So it means your phone is black and orange in color now? Show show la

Since you're using W800i firmware, then download for W800i lo. And stick to CID36, it's way easier to mod with CID36 because FAR can be used

OEM have different grades... Grade A/AA/AAA. My friend bought a Grade A for RM12 only, but the seller told him the most you can use this earphone is like a few weeks only, then it will spoil And the physical quality is terrible, the Walkman word like water kena watercolour... The words run away Didn't try how it sounds though because I was in a hurry to get home. Better don't hold too high expectations for something that cheap, basically you pay for what you get la.

Not bad, black and orange looks cooler than white and orange Hmm... But I think it would've been better if the side buttons are in black and the memory stick cover also in black

This post has been edited by Dreamworks: Sep 12 2007, 04:53 PM

Dunno ar... Mix and match with W810i ma got ady lo

Sorry, I didn't notice your post before

Anyway, you need to patch FAR with some certain files to use it with CID49 phones... Don't ask me which ones because I can't remember, and I don't exactly use FAR for modding The pic taken from your phone seems a bit noisy... Is it yours newer batch of CID49s (After week20)? Here's mine, before week20:

BEHOLD! The power of ZUZA1 cam driver
[attachmentid=294142]

This post has been edited by Dreamworks: Sep 12 2007, 06:30 PM

Is your phone before week20 or after? If before no need to change anything Will try to find the file in my HDD afterwards

Erm... At the back of the phone, where all the serial number/IMEI/Sirim stickers are located. Look for something like W20Y06, which means week20year06

This post has been edited by Dreamworks: Sep 12 2007, 06:58 PM

Then it's after week20 ady lo. I'll modify the file for you before uploading, check back later tonight

K800i? Sure or not? But I know K800i's nightshot will definitely be better than K750i's And yes, CID36 can be modded with menus/drivers just like CID49

---

Added on September 12, 2007, 10:47 pmBut one problem... I no longer have the ZUZA driver with me, left Kriomag 21.8 So I'll try to find and upload it tomorrow.

This post has been edited by Dreamworks: Sep 12 2007, 10:47 PM

Finally found the driver, but I didn't change anything because forgotten how ady Just extract the contents of the zip file to "files_to_upload" within XS++ folder, then upload the files via FSX. Note that your original cam driver will be overwritten

[attachmentid=294921]

This post has been edited by Dreamworks: Sep 13 2007, 06:28 PM

Who says so? CID36 or was it CID49 were the first phones supported before CID50/51/52 even show up

I've done this at least 50 times liao (Not including those I did for my friends) and so far no problems No need to rename, and keep the directory structure, BUT... CID49 phones are a little troublesome la, need to connect and disconnect phone a few times during the upload process (XS++ will instruct you to do so). AFter uploading, need to reflash the MAIN. Much like the method used for FAR, but a little safer I guess.

So, dare to try? AFter a few times you'll get the hang of it. Also make sure you have a ready and working MAIN file before attempting to mod, and your USB connection is stable.

---

Added on September 13, 2007, 9:01 pmNewbie modders should start with XS++, and not FAR... Do something wrong in FAR and you might even need a service cable to revive your phone

This post has been edited by Dreamworks: Sep 13 2007, 09:01 PM

Eh? CID49 is actually quite good, plenty of menus, icon pack, patches, mods, and drivers were made for them... Like I said, after you get the hang of it, it'll be easy. And XS++ is actually quite safe

FSX is not a program, it's a function of XS++ which is used to upload files to your phone's FS. Using FSX with CID49 is not as easy as CID51/52 where you just click a button and everything begins to upload. Since so many people PM me, I might as well just tell you guys here

I'll be using W800i's firmware and a CID49 K750i as an example.
1) Download a compatible MAIN firmware for your K750i, one that matches your customization files eg. APAC MAIN must be paired with APAC_1 custom files.
2) Slide the MAIN you downloaded with GSlide so it becomes compatible with your CID49 as all W800i's MAIN are initially CID36 and will not work on your phone.
3) Apply any VKP patch you want during the sliding process.
4) Start the sliding and wait for the process to complete... Walla! You now have a ready MAIN

Next,
1) Paste all files you want to upload into the "files_to_upload" folder within XS++ folder, with the correct directory structure eg. camera driver belongs in "ifs/settings/camera/".
2) Start XS++, and connect your phone.
3) Click "Customize File System".
4) Click "Settings" under "Configuration".
5) Click "BreakXS" for "Wayin".
6) Click "FSX" under "Configuration".
7) Click "Start FSX".
8) XS++ will flash "Breakloader" and you might be asked to unplug and reconnect the phone during this process.
9) Once XS++ has access to the FS, files in the "files_to_upload" will be transfered to the phone. When done, you might be asked to to unplug and reconnect the phone.

Finally,
1) In XS++, click "Flash" under "Configuration" and flash the MAIN you prepared earlier. DO NOT flash the File System.
2) When XS++ says it's done, it's done

You can now start using your phone again And a note:
<----- REMOVE THE SIM CARD AND MSPD BEFORE FSX AND FLASHING! ----->
And
<----- FOLLOW XS++'s INSTRUCTIONS! ----->
There, I think you guys can see the lines clearly

---

Added on September 13, 2007, 10:26 pmIf you just want to flash the MAIN and FS, then skip the whole section on FSX. MAIN and FS must be prepared with GSlide. And this header must be used in GSlide for firmwares (MAIN and FS) with Chinese support:
"header__DB2010_49_red_344blocks.bin"

After flashing the FS, your phone needs to be customised.

This post has been edited by Dreamworks: Sep 13 2007, 10:26 PM

After FSX, CID49 phones cannot start until you reflash the MAIN because the firmware is "broken" during BreakXS... Sort of la So need to have your "K750_R1CA021_MAIN_CHINA_CL_RED49" ready before you upload the drivers/use FSX.

Haha... Modding CID51/52 phones are easier because all these steps are not required

Nah... I don't mind, just go ahead and post

The sliding part only applies to a W800i firmware which is CID36 based. Since you'll be using a CID49 MAIN for your K750i, then the sliding aka conversion is not needed

This post has been edited by Dreamworks: Sep 13 2007, 11:35 PM

How much will you be paying for it?

---

Added on September 14, 2007, 1:25 pm@kksoon
Generally, the price hovers around the range of RM400 - RM425. It depends on where you are and the condition of the phone, KL prices will be somewhat lower

This post has been edited by Dreamworks: Sep 14 2007, 01:25 PM

Yes, phones with warranty will definitely fetch higher price

I have a 4GB MSPD but only less than 500MB of free space remaining So, I am a phone maniac eh?

---

Added on September 14, 2007, 7:16 pmTo be exact, 368MB left @.@

This post has been edited by Dreamworks: Sep 14 2007, 07:16 PM

Hmm... Let's see... Roughly 2.8GB of music, 500MB of MTVs, 40MB of games, and other misc clips/pics

Now left 268MB

In WAV formet a? 3 album and it's already 4GB?

Hehe... I only recommend good stuffs ZUZA1 works very well with most K750is.