Q6600 Overclock and Temperature
|
|
 Aug 9 2008, 04:47 PM
Return to original view | Post
#1
|
 
Junior Member
497 posts Joined: Sep 2005 From: PSN Home/Steam  
|
hi there,
I am currently using a T-Power I45 mobo and max i could achieve is 3.2Ghz. Vcore at approx 1.32V at 9X Using xigmatek red scorpion...Any sifu's here can teach how to get more ar? coz if i change fsb i get BSOD... |
|
|
Aug 16 2008, 12:51 PM
Return to original view | Post
#2
|
|
Junior Member
497 posts Joined: Sep 2005 From: PSN Home/Steam
|
QUOTE(k!nex @ Aug 11 2008, 07:39 PM) lower ur multiplier to 8X. from my own experience, i do better wif 8X multiplier than 9x. Sigh!!!! Multiplier 8 also cannot go...Temp is the issue... Funny thing, my core 1 and core 2 is approx 7 degrees higher than my core 3... what temp do you normally see? Tjunc or Tcase? My T junc anf Tcase a lot of difference approx 9-10 degress diff...Added on August 11, 2008, 7:43 pm hv u tried to pull out 2 piece of ur RAM for OC ??i've seen ppl's comment abt if u put 4 sticks of RAM,it will lower ur OC abit.ur load temp is really scary  maybe different batch batch of Q6600,i only need to set 1.29V at bios for 400X8 setting.btw, ur proc is almost same like kmarc's one judging from the voltage and frequency u get.   |
| Change to: |  0.0344sec
 0.46
 7 queries
 GZIP Disabled
Time is now: 8th December 2025 - 10:39 PM |
Quote