in average, can q6600 go .. runs at 3.00ghz on stock vcore?
or need to bump vcore that..

is q6600 go , needs big ass cooler and good big casing to achieve idle at 3x degree..?

or.. stock hsf with small casing.. will do...

the little bro. x3210 counts ka? lolzz
but i stuffed it inside sff setup though.. so the temp. won't doing any good`
running 2.8 w/ 1.2v on 24/7 loaded.

sure can go lower with manual undervolt..`
mine dual-orthos-able @ bios 0.975v
0.875v ... need to reset cmos already >_<

bah!! me too.. ,
stable at 7x400, bios 1.18v
but when try 8x400.. bios put 1.25v also cannot stable..
cannot try higher liao.. too hot >_<

dang, tried crank vcore to 1.2375@bios ... stress it,
cpu : 63c/58c (coretemp/realtemp)
nb : 52c (everest)

cpu & nb differs only 6c .... wtf!

wow~ 3.6 on air , 65c full load.
must be a gem w/ low vcore.

you'r using 9 multi,
so ur fsb is still low, most probably is still lack of juices on vcore.

try a step higher, maybe 1.325v (if temp. allows)

i don't think 3xx fsb , needs to pump nb to stable.

the heat really the problem for clocking up the kentsfield' zzzZzz
itchy to oc back, but no gears to cool it down

btw, guys... once ur cpu temp. reaching 7x-8x C'
i wonder what's ur nb temp.? , since it's close enough to hsf.