im using BI P35,i cant find cpu voltage increment option(theres CPU VID,the increment is by mW,not comfirm is it this) & do this mobo enable me to change divider?using crucial ballistix 2.2v

need some help,newbie in oc

hmm...still have no idea on how to change my divider,im on 800mhz Q6600 so its 2:3 ratio.

need help here,i will have BSOD or fail prime test(hang once started).I run a cpu only test to show load cpu voltage.Even at this speed im running sometimes encounter BSOD when restarting.Even at 5-5-5-15 1.925vram at 1000mhz will fail prime test(hang once started) but no BSOD overfall usage.

vRam 2.1v now



still have no idea how to change divider on my BI P35,have an option ram speed try changing it 333/1066 but fail to startup at vRam 1.925v

This post has been edited by NewbieBetta: Jun 26 2009, 04:49 PM

vmch is the north bridge chipset voltage?

This post has been edited by NewbieBetta: Jun 26 2009, 06:21 PM

reapply TIM & monitor result,did you OC it before?

what could be wrong on setting,i cant get stable prime test from my setting 5.5.5.15 1066mhz @ 2:3 ratio,had tried bumping alittle of north bridge, PLL, clockgen voltage, cpu voltage.

tried already but useless,tried 1:1 ratio cant stable at fsb400 with multiplier x8,reboot once run prime test