Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Q6600 Overclock and Temperature

views
     
cscheat
post Sep 19 2008, 11:35 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(uzairi @ Sep 18 2008, 06:00 AM)
Bro any ss of your 4ghz stable ? What's the voltage needed to make it run at 4ghz ?
*
4Ghz is stable of course, but i wont run it for 24/7 ! it is for benching

i need around 1.6v
cscheat
post Oct 10 2008, 09:11 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


guys, i just changed my Mobo from ABit ip35 pro to XFX 780i and found that my Q6600 Vcore requirements !

Abit ip35 Pro = 1.40Vcore for 3.6Ghz !!!
XFX 780i = 1.32Vcore for 3.6Ghz !!!

(recorded using CPUZ)
cscheat
post Oct 10 2008, 09:19 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(syahirax @ Oct 10 2008, 10:15 AM)
thats in bios?pretty amazing vcore for 3.6 ghz.whats your VID,mate?
*
yes, pretty amazing ! my VID is 1.25v it is a GEM !


Added on October 10, 2008, 9:28 amSyahirax, last time u said u got 1 Q6600 lapped right ?

so i want to ask how much temp drop after lapped ?

This post has been edited by cscheat: Oct 10 2008, 09:28 AM
cscheat
post Oct 10 2008, 03:27 PM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(syahirax @ Oct 10 2008, 10:32 AM)
mine is 1.265,1.25 is pretty nice.Used to have 2 Q6600 with 1.325(not the best) and those overclocks worst.The lapped one is B3 and when i bought em i straight away lapped the proc.So didnt know the temp before.
*
i saw many people got good results after lapped !
cscheat
post Oct 28 2008, 12:18 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


Reporting ! latest temperature for Q6600 (i changed my Mobo & Heat Sink arrangement)





Attached thumbnail(s)
Attached Image
cscheat
post Oct 31 2008, 10:54 PM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(uzairi @ Oct 28 2008, 02:11 PM)
3.6ghz with only 1.36v ? under 100% load your temp is quite low.. what heatsink you are using ?
*
the good OLD thermalright 120 Xtreme (little rusty...)

QUOTE(k!nex @ Oct 29 2008, 06:22 AM)
if i'm not mistaken,he tweaked his GTL setting to achieve lower vcore, from wat i see VTT increased from 1.2 to 1.38.bro cscheat,mind to let us noe how much vNB u pump??
*
GTLREF is not easy to tweak ! im learning ! the lanes adjustment will lead to more stability & lower vcore and FSB vtt...
golden thumb or rule of GTLREF volts = 2/3 of FSB VTT... needs lots of prime95 to test it out....

QUOTE(cdlim87 @ Oct 29 2008, 04:53 PM)
HERE the ans for u, y his temp quite low.. biggrin.gif
''push + crazy pull'' concept there... tongue.gif  rclxms.gif
*
QUOTE(iBenQ @ Oct 30 2008, 06:19 AM)
what is push + pull config? =.="
*
QUOTE(kmarc @ Oct 30 2008, 08:28 AM)
One fan to push (blow) air through the heatsink, one fan to pull (suck) air from the heatsink..... wink.gif
*
Now even more CRAZY PULL over 300CFM, Delta FFB1212EHE + Sanyo Denki 109R1010 (previously is 120mm X 25mm + 120mm X 38mm for Pull) ! i will try out the CRAZY PUSH Soon !!!! shocking.gif shocking.gif

user posted image


more pics below ... drool.gif

» Click to show Spoiler - click again to hide... «


This post has been edited by cscheat: Oct 31 2008, 11:00 PM
cscheat
post Nov 1 2008, 09:30 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


iBenQ,

for Q6600, newbies put 1.4v FSB VTT for 3.6GHZ OC .... for the expert, they can put 1.2v FSB VTT after adjusting the GTLREF

but if you wanna go 4Ghz without adjusting the GTLREF, put 1.5v for FSB VTT for better stability...

what is your VID ?
cscheat
post Nov 13 2008, 02:46 PM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(iBenQ @ Nov 12 2008, 02:24 PM)
i wanna ask, anyone reached 4.5ghz b4??? for those who've reached it, can u tell me wats ur vcore???
*
me, mine can do 4Ghz at around 1.55vcore... but very hot and not that stable !


Added on November 13, 2008, 3:13 pmguys ! i will lap my Q6600 this weekend ! stay tuned for the results !!!

AHAHHA!

This post has been edited by cscheat: Nov 13 2008, 03:13 PM
cscheat
post Nov 14 2008, 12:37 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(k!nex @ Nov 13 2008, 08:48 PM)
guys, i think its time for new games to  fully utilise our quad core procs. look at recommended requirement for GTAIV here. it says:

GTA IV PC delayed, system requirements

Rockstar has confirmed the rumoured delay of GTA IV PC that puts the release of the game all the way back until December 2nd. The announcement confirms the change in retailer dates that were first spotted on retailers websites.

The delay puts the release of the game back by two whole weeks, though Rockstar haven't explained what exactly the reason for the slip is.

The good news though is that Rockstar has at least released the minimum and recommended system requirements for the game, which appear similar to those which had previously been leaked by Microsoft's Games for Windows website before they were removed, Check them out below.

Minimum System Requirements
* OS: Windows Vista - Service Pack 1 / XP - Service Pack 3
* Processor: Intel Core 2 Duo 1.8Ghz, AMD Athlon X2 64 2.4Ghz
* Memory: 1.5GB, 16GB Free Hard Drive Space
* Video Card: 256MB NVIDIA 7900 / 256MB ATI X1900

Recommended System Requirements
* OS: Windows Vista - Service Pack 1 / XP - Service Pack 3
* Processor: Intel Core 2 Quad 2.4Ghz, AMD Phenom X3 2.1Ghz  <----------------------concentrate here
* Memory: 2 GB (Windows XP) 2.5 GB (Windows Vista)
* 18 GB Free Hard Drive Space
* Video Card: 512MB NVIDIA 8600 / 512MB ATI 3870

means games are starting to favour quads over duals  rclxm9.gif
oopss..sorry sorry. i forgotten dis is not hardware thread..i can delete it if u guys wan it.
*
QUOTE(uzairi @ Nov 13 2008, 09:23 PM)
To fully utilise the Q6600, why not join Folding ?
*
QUAD FTW !!!

cscheat
post Nov 18 2008, 08:55 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


Guys ! im back !!!

user posted image
user posted image
lapped to 2000grit !!! Mirror Finish !!! brows.gif
user posted image
sit tight there little bro !
user posted image
user posted image
HSF + Fan Config !!!

This post has been edited by cscheat: Nov 18 2008, 08:56 AM
cscheat
post Nov 19 2008, 09:32 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(uzairi @ Nov 18 2008, 11:21 PM)
No la, daily 3.6ghz @ 1.475v load around 65c, 3.8ghz @ 1.625v folding load around 75c lol
What the temp diff ?  hmm.gif
*
QUOTE(unknownsubject @ Nov 19 2008, 07:37 AM)
after putting the hsf,what temp do u get?
*
guys, temp diff between lap and no lap is around 5C !!!

now waiting sometime for the thermal paste material to "break in"...

hope will achieve lower temp !!! drool.gif

cscheat
post Nov 24 2008, 12:21 PM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(LExus65 @ Nov 19 2008, 02:09 PM)
how fast u setting ur fan at ?? crazy hehe.......

may be i should lap my q6600 also ...........
*
yes, please lap and update us with pics !!! my fan are noisy !!! but already got used to it !!!

QUOTE(uzairi @ Nov 20 2008, 03:50 AM)
5c hmm.gif

Which thermal paste did you use ?
*
AC MX-2, will post some pics later

QUOTE(verdict @ Nov 24 2008, 01:08 AM)
Wuuuu..... drool.gif  drool.gif  drool.gif

nice mirror finish... brows.gif  brows.gif

cant resist...

thumbup.gif  thumbup.gif  thumbup.gif
*
use 2000Grit ! bro verdict, u can do it !

QUOTE(Dickong @ Nov 24 2008, 10:13 AM)
How you hold the processor when lapping becos the proc chip is small, n any risk that may contact the other side of the chip, secondly it seem very hard to hold it. Did you use anything to hold it when u do lapping.
*
Bro Dickong, remember the small little black plastic that come together with the Proc? it should cover the underside of the contacts during lapping. Even force should be applied to the proc while lapping to avoid uneven surface !
user posted image
enjoy !
cscheat
post Nov 25 2008, 08:25 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(Dickong @ Nov 24 2008, 06:19 PM)
I just lap my processor but i am only getting about 3c different, is it i have apply too much as5 on it, i apply small amount on the proc n small amount on the heatsink, is it alright. secondly why small difference only.
*
you must apply it in a proper direction ! HORIZONTAL for QUAD CORE, and VERTICAL for DUO CORE !

user posted image
cscheat
post Nov 25 2008, 11:40 PM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(Dickong @ Nov 25 2008, 09:10 PM)
Improve of 5-6c after lapping but still my Q6600 @ 3.4g voltage @1.4 only but temp seem a bit high at 61-60-55-52c full load. Is it possible that applying too much of AS5 can be the cause of high temp.
*
don't apply too much, just follow the pic above
cscheat
post Nov 26 2008, 08:21 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(OC4/3 @ Nov 26 2008, 01:23 AM)
Try google:TRUE washer mod,can drop some temp as well
*
hey OC4/3, fror TRUE MOD got 3:
1. TRUE washer mod
2. Backplate Card mod
3. Bolt through mod

but pls beware, excessive pressure and stress will break the internal PCB layers of your BOARD

Danger ! sweat.gif
cscheat
post Nov 27 2008, 11:17 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


hmm... too high for me smile.gif haha
cscheat
post Nov 27 2008, 08:16 PM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


for me, i will never go 60C during load !
cscheat
post Dec 8 2008, 08:55 AM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(jetyap @ Dec 6 2008, 09:16 PM)
Hmm, I'm running 3.2GHz at 1.2V. Q6600 G0, 400 X 8 atm...still testing for stability. But one thing I notice is that at idle, the vcore is 1.23V but during load is 1.20V.

So which one is the one to consider? At idle or at load?
*
do a VDROP MOD
cscheat
post Dec 8 2008, 07:51 PM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


QUOTE(iBenQ @ Dec 8 2008, 05:30 PM)
hmmm... forget liao my vcore during load when at 3.2ghz,, but i think its around 1.25 during load... now @ 3.6ghz 1.424 idle n 1.392 on linx... set 1.45v at bios, n its the best settings i can go so far... will increasing nb voltage allow me to put lower vcore for my proc???
*
no no no ! increasing NB voltage unless u are not stable with 2 or more sticks of rams !!!
cscheat
post Apr 19 2009, 05:17 PM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars


wow guys ! this thread is still alive !!! Long live Q6600 !!!

3 Pages < 1 2 3 >Top
 

Change to:
| Lo-Fi Version
0.0418sec    0.35    7 queries    GZIP Disabled
Time is now: 9th December 2025 - 11:02 PM