my goodness...after i read some article. i set the HT, NB, SB voltage to 1.24v, 1.5v....i can boot in window but suddenly bsod..stated malfunction detected n sysytem halted....
i reboot again n set to all auto (no oc) then my lan device cannot connect to internet..i using my lappy now....sienzzz....help..

weird as mars is a nice mobo..

LOL, just clear the cmos and do again.

great.. i was able to oc....thx bro for ur assist me....

Great to hear that, so what's the progress ?

today i bought myself a cm hyper z600....this cpu cooler very big...ngam ngam fit in my cm elite r334....just a little bit gap between psu n hsf...

Nice, now you can do some serious overclocking

wow...heard that heatsink got quite not bad reputation in frostytech...

post some temp result ya bro

ok this is havent oc yet....idle temp is 32c.....oc to 2.6ghz using prime95 small fft is 54c...



This post has been edited by subrok007: Aug 29 2008, 06:16 PM

Nice

Target 3.2ghz

yay bro....will post some prn scrn...

this is the my monster pet!!



great, this is the warrior spec...
idle is 38c....
vdrop is 0.04v


This post has been edited by subrok007: Aug 29 2008, 09:08 PM

if your going to be running at a lower kinda ghz like in the range of 3Ghz, try dropping your multi from X9 to X8, there is a tangible increase in performance. of course your fsb will be higher which is a good thing...

Nice More clocks bro !

anybody here got the high vid g0 q6600 with batch number l8xx??
here's my 24/7 oc btw





this is my 2nd 1.325v vid cpu btw with the first one being an e6300

This post has been edited by ben_panced: Sep 1 2008, 03:17 PM

Having lower doesnt mean u have higher overclockability coz there's a lot of those with high vid proc that can clock like their lower vid siblings.

3.4ghz on a q6600 is not bad either, so dont worry.

with my cpu it seems i cant get to 3.6ghz even if raised the vcore to 1.56v
didnt dare to go higher as the cpu and the cpu vrm are very hot at that voltage
haih luck is not on my side i guess

This post has been edited by ben_panced: Sep 1 2008, 03:37 PM

Ya, maybe bad batch but 3.4ghz is okay already what

yalor 3.4ghz is better than no oc at all, haha i wonder what is the max of for b3 q6600 is it the same with my g0??

G0 would be slightly better in oc iinm because at the same speed they uses less voltage and less heat produced.

Im using G0 btw.

2.4Ghz to 3.4Ghz means extra 1Ghz per core and 4Ghz cumulative, that means you already squeeze extra a piece of E6300 u used before inside your Q6600, now Q6600 + E6300?!!?!! still not satisfied ah?lol...

This post has been edited by coolkwc: Sep 1 2008, 05:43 PM

i was expecting 3.6ghz 24/7 oc but i made a mistake of not researching about the batch number first
haha this mistake will not happen again