Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed
102 Pages « < 54 55 56 57 58 > » Bottom

Outline · [ Standard ] · Linear+

 Q6600 Overclock and Temperature

views
     
Braynumb
post Aug 13 2008, 09:14 AM

Yea, Still Broke
******
Senior Member
1,409 posts

Joined: May 2008
From: Somewhere Over There...
QUOTE(k!nex @ Aug 12 2008, 02:52 AM)
ur vdroop... shocking.gif
wats ur temp at 3.2 ghz?
mine is around 29C at idle,58C at 100% load.
i set 1.29 at bios, cpuz reads at 1.24 idle and 1.184-1.2V at load(prime95 blend test).
i wanna see how good is ur 12cm xigmatek, i feel like switching to red scorpion also  laugh.gif
*
not sure if it's vdroop or vdrop... hehehe... still new with these lingo... hehehe..

at 3.2GHz, temps are just nice... idle is around 32~35'c and at load is around 55~57'c

vcore i set to 1.4v la... but in cpuz is 1.242v during load.. the xigmatek is really damn good... hahaha.. changed the fan to Nidec Beta V.. so, highly recomend it.. if with stock fan, load temp is around 56~59'c la... it's good also...

This post has been edited by Braynumb: Aug 13 2008, 09:15 AM
kmarc
post Aug 13 2008, 05:29 PM

The future is here - Cryptocurrencies!
Group Icon
Elite
14,576 posts

Joined: May 2006
From: Sarawak
QUOTE(Braynumb @ Aug 13 2008, 09:14 AM)
not sure if it's vdroop or vdrop... hehehe... still new with these lingo... hehehe..

at 3.2GHz, temps are just nice... idle is around 32~35'c and at load is around 55~57'c

vcore i set to 1.4v la... but in cpuz is 1.242v during load.. the xigmatek is really damn good... hahaha.. changed the fan to Nidec Beta V.. so, highly recomend it.. if with stock fan, load temp is around 56~59'c la... it's good also...
*
Vdrop is the difference from bios vcore and windows vcore at idle.

Vdroop is the difference from windows vcore at idle and windows vcore at load.

For example:

BIOS set vcore : 1.400v
Windows vcore at idle : 1.360v (so vdrop is 1.400v - 1.360v = 0.040v)
Windows vcore at load : 1.330v (so vdroop is 1.360v - 1.330v = 0.030v)

I have a simple explanation of the vdroop/vdrop "phenomenon" in my C2D/C2Q overclocking guide wink.gif

Note : Remember that software monitoring of voltages are not that accurate....

This post has been edited by kmarc: Aug 13 2008, 05:29 PM
wookp
post Aug 16 2008, 12:51 PM

Casual
***
Junior Member
497 posts

Joined: Sep 2005
From: PSN Home/Steam
QUOTE(k!nex @ Aug 11 2008, 07:39 PM)
lower ur multiplier to 8X. from my own experience, i do better wif 8X multiplier than 9x.

Added on August 11, 2008, 7:43 pm
hv u tried to pull out 2 piece of ur RAM for OC ??i've seen ppl's comment abt if u put 4 sticks of RAM,it will lower ur OC abit.ur load temp is really scary  blink.gif 
maybe different batch batch of Q6600,i only need to set 1.29V at bios for 400X8 setting.btw, ur proc is almost same like kmarc's one judging from the voltage and frequency u get. laugh.gif
*
Sigh!!!! Multiplier 8 also cannot go...Temp is the issue... Funny thing, my core 1 and core 2 is approx 7 degrees higher than my core 3... what temp do you normally see? Tjunc or Tcase? My T junc anf Tcase a lot of difference approx 9-10 degress diff...
cscheat
post Aug 18 2008, 02:58 PM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars
hey guys ! long time no posting here !
tkh_1001
post Aug 19 2008, 12:27 AM

Look at all my stars!!
*******
Senior Member
2,547 posts

Joined: Oct 2007
QUOTE(cscheat @ Aug 18 2008, 02:58 PM)
hey guys ! long time no posting here !
*
then ma post some results lor.... drool.gif laugh.gif
uzairi
post Aug 19 2008, 03:26 AM

Team almostthere
*******
Senior Member
6,744 posts

Joined: Jan 2003
From: World Wide Web Status: Banned
Hello guys, just bought my q6600 a few days ago biggrin.gif
syahirax
post Aug 19 2008, 07:17 PM

anomie!
****
Senior Member
562 posts

Joined: Mar 2006
From: hell
guys,just wondering,im using Q6600 B3,and i overclocked it to 3 ghz and the idle temp is 50 C/49C/48C/50C,and im using xigmatek HDT S1283,Dont you think the temp is a bit high?Ive lapped my hsf and proc anyway.
tkh_1001
post Aug 19 2008, 07:30 PM

Look at all my stars!!
*******
Senior Member
2,547 posts

Joined: Oct 2007
QUOTE(syahirax @ Aug 19 2008, 07:17 PM)
guys,just wondering,im using Q6600 B3,and i overclocked it to 3 ghz and the idle temp is 50 C/49C/48C/50C,and im using xigmatek HDT S1283,Dont you think the temp is a bit high?Ive lapped my hsf and proc anyway.
*
not sure...

me using non-lapped s1283 and it can hit 6x degree c on priming at 3.5ghz in an aircond room sweat.gif
uzairi
post Aug 19 2008, 07:36 PM

Team almostthere
*******
Senior Member
6,744 posts

Joined: Jan 2003
From: World Wide Web Status: Banned
The temp is normal dont worry, my q6600 would reach 70c when primming with sp2004 x4. sweat.gif
syahirax
post Aug 19 2008, 09:07 PM

anomie!
****
Senior Member
562 posts

Joined: Mar 2006
From: hell
QUOTE(tkh_1001 @ Aug 19 2008, 07:30 PM)
not sure...

me using non-lapped s1283 and it can hit 6x degree c on priming at 3.5ghz in an aircond room sweat.gif
*
yeah but i assume yours is G0 stepping while mine is B3.Or did i lapped my proc or hsf wrongly?(but both on flat surface)
tkh_1001
post Aug 19 2008, 09:15 PM

Look at all my stars!!
*******
Senior Member
2,547 posts

Joined: Oct 2007
QUOTE(syahirax @ Aug 19 2008, 09:07 PM)
yeah but i assume yours is G0 stepping while mine is B3.Or did i lapped my proc or hsf wrongly?(but both on flat surface)
*
cant really know actually... cos even if u do same clock with me but the temp might differ for the same proc...

just keep it under 60c lor....

u didnt compare with the temp b4 lap?
uzairi
post Aug 20 2008, 12:37 AM

Team almostthere
*******
Senior Member
6,744 posts

Joined: Jan 2003
From: World Wide Web Status: Banned
QUOTE(syahirax @ Aug 19 2008, 07:17 PM)
guys,just wondering,im using Q6600 B3,and i overclocked it to 3 ghz and the idle temp is 50 C/49C/48C/50C,and im using xigmatek HDT S1283,Dont you think the temp is a bit high?Ive lapped my hsf and proc anyway.
*
QUOTE(tkh_1001 @ Aug 19 2008, 07:30 PM)
not sure...

me using non-lapped s1283 and it can hit 6x degree c on priming at 3.5ghz in an aircond room sweat.gif
*
I think it makes sense, one of u have lapped and the other one non lapped.. so that explains the temperature diff.

Other factors might affect the results tho, but ur temp is still acceptable to me. hmm.gif
syahirax
post Aug 20 2008, 12:40 AM

anomie!
****
Senior Member
562 posts

Joined: Mar 2006
From: hell
QUOTE(tkh_1001 @ Aug 19 2008, 09:15 PM)
cant really know actually... cos even if u do same clock with me but the temp might differ for the same proc...

just keep it under 60c lor....

u didnt compare with the temp b4 lap?
*
well thats my mistake,ive bought a used B3 Q6600 and straight away lapped em.Well,i thought it could at least drop few Celcius like some people reported.
uzairi
post Aug 20 2008, 02:47 PM

Team almostthere
*******
Senior Member
6,744 posts

Joined: Jan 2003
From: World Wide Web Status: Banned
Did u lapped the proc evenly ?
syahirax
post Aug 20 2008, 03:45 PM

anomie!
****
Senior Member
562 posts

Joined: Mar 2006
From: hell
yeah,i guess so,on the flat surface(glass)
uzairi
post Aug 20 2008, 04:52 PM

Team almostthere
*******
Senior Member
6,744 posts

Joined: Jan 2003
From: World Wide Web Status: Banned
Do you have the pic for both the proc and the hsf u lapped ?
cscheat
post Aug 22 2008, 05:33 PM

V.V.I.P member
******
Senior Member
1,262 posts

Joined: Aug 2005
From: Mars
guys ! anyone have another Q6600 which have a LOW VID ? im going to build another rig
uzairi
post Aug 22 2008, 06:18 PM

Team almostthere
*******
Senior Member
6,744 posts

Joined: Jan 2003
From: World Wide Web Status: Banned
4ghz not enuf ka ?
tkh_1001
post Aug 22 2008, 06:57 PM

Look at all my stars!!
*******
Senior Member
2,547 posts

Joined: Oct 2007
QUOTE(uzairi @ Aug 22 2008, 06:18 PM)
4ghz not enuf ka ?
*
OCer always never satisfied laugh.gif laugh.gif

waiting his results drool.gif drool.gif drool.gif
uzairi
post Aug 22 2008, 07:06 PM

Team almostthere
*******
Senior Member
6,744 posts

Joined: Jan 2003
From: World Wide Web Status: Banned
How about yours bro ? Crank up summore la.. brows.gif
« Next Oldest · Overclockers United · Next Newest »
 

102 Pages « < 54 55 56 57 58 > » Top
Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0274sec    1.15    6 queries    GZIP Disabled
Time is now: 9th December 2025 - 02:07 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.