n00b in overclocking...

3.2GHz @1.33vCORE


what the hell... 90°C on idle temp?

slowly la... , E6750 not bad what... , haven't got a chance to stress test for long period, maybe tonight... , for now... trying to game with this clock

*** updates ***

tried tightening the timing... not yet stress test, just succesfully booted up, game with it... @DDR850 4-4-4-12 CR2, 2.0vDIMM


This post has been edited by sniper69: Dec 13 2007, 10:26 AM

ThermalRight HR-01 LGA-775 + 120mm ADDA Fan @Full Speed

This post has been edited by sniper69: Dec 13 2007, 10:30 AM

, gonna try that...

yeap indeed... still in test phase... eh btw... i found that this mobo Abit IP35-E is not as good as my last DFI SLI-DR la... i meant, not the higher clock, not that... but it's the adventure... easier to say... not so many options to tweak... , or is it me who n00b...

, tried on 400 x 8, with 1:1, in the BIOS and Windows Properties, clocked @3.2GHz, but in CPUz, Lavalys Everest, clocked 400 x 6, seems lowered the CPU multiplier, i wonder what happened...

i did disabled it...

here's the BIOS menu...

CPU Feature >

Thermal Control - Enabled

Limid CPUID MaxVal - Disabled

C1E Function - Disabled

Execute Disable Bit - Disabled

Virtualization Tech - Enabled

EIST Function - Disabled

in the BIOS, i actually did set to 400MHz FSB x 8 = 3.20GHz, RAM @DDR800 @5-5-5-15 CR2... but after loading to windows... i got 2.1GHz CPU

one more thing... i don't know what's the problem, everytime i save changes in the BIOS, the system will just shut down, after about 3-4 seconds, then it'll auto reboot (depends too... sometimes took me 2-3 times to power up...), is this because of the PSU? or the mobo itself?

, same thing... guess this mobo is crap , or is it the BIOS?
about the overclock unstable... i hit 3.2GHz on the 1st day, but i don't know what happened, it showed 2.13GHz this morning...

, not sure getting Foxconn Mars or DFI LP DK P35-T2-RS...
both of them really gave me headache now...

... i have to sell of everything to get both board ...

DFI +ve :

cheaper than Foxconn Mars by ąRM100
the 100% full solid capacitors gonna cost us

Foxconn Mars +ve :

confirmed can get 100% full solid capacitors @ąRM700
active cool heatpipe

other than that... not sure...

, , i think i'm going to get Foxconn Mars from Darksythe , helping him (hopefully) get a cheaper board... it's good board i must say, and i think worth to try the new Foxconn here , the DFI, maybe gonna grab it after Christmass

hey... are you the one who bought Mars from Darksythe

well that make two of us... , me myself gonna get maybe tomorrow... god, i can't wait now... 5 days without gaming

what's the max load temperature on Core 2 Duo? i mean the ideal load temp with stock/air cooling...

saya budak baru belajar... kalau salah tolong tunjukkan

seems for now, can boot to windows @475 x 7, 4-4-4-9 2T (i can't 1T though)... tried increase 10 by 10, until 495MHz, it won't boot at all, 485MHz, half-way booting then BSOD ... i want to hit 500MHz somebody... help me...

increase all , don't worry the temp all @acceptable range...

as for the CPU temp... don't get fooled, it's just i think temperature mis-reading... why? well, the temp similar to my GPU @60°C, unlike the GPU i touched pretty hot compared to CPU which is i can't feel the heat at all

i'm aware of that... , but i wonder... the temp load vs idle almost the same, could be thermal paste? nope... i even remounting it triple, quadruple... still the same ... only remain same... i got warm (i mean, warm heatpipe...) - i'm on HR-01 by the way...