E2140 @ 3056ghz Stock Volts, Batch: Q722A025
Patriot DDR2 667 5-6-5-15 Stock Volts
Gigabyte P35 DS3
Stock Intel HSF



-Absolutely Stable and not a suicide run
-cant get past 385x8 with stock volts

Silverstone ST400 only..

Yeap all stock volts

Initial quick test ( was sorting out 10 e2140 for the gold chip mar)

can do 430x8 @ 1.4v, passed super pi 4m ( quick test marr)

A bunch of SLACR (G0) q6600 babies spotted in digital mall section 14, ALL IT yesterday

This post has been edited by bryanyeo87: Nov 24 2007, 08:36 AM

oo ok.... so B3 is the rare and wanted stepping ar? o.0"

i thought G0 is quite rare and they are better ocers?

nice...wuts the load temp and vcore?

http://tw.giga-byte.com/Support/Motherboar...eflashBIOS.aspx

take your pick
personally i prefer to flash from dos

lulz... hyperx, the noob rams hahaha

ok, sorry that was mean, anyway, you could tell us what is your current speed and voltages for the rams that you set instead of just the timing though


u hit the fsb wall? chipset wall? how about more voltages? what is the speed you are running at now and voltages, last but not least, what is the temps of the cpu under load?

This post has been edited by bryanyeo87: Jan 18 2008, 11:48 PM

i think if you would increase the voltage to 2.3v and retry it would work
or alternatively try this settings 5-6-5-15


@gsan,
sp2004 and orthos sometimes reads the fsb and multiplier wrongly :S

so use cpuz (latest version)

This post has been edited by bryanyeo87: Jan 20 2008, 03:37 PM

yeaps, due to vdroop and vdrop ( they are both different things though)
open up memset turn performance level to 8 or 7, its also knowned as tRD in bios

http://forum.lowyat.net/index.php?showtopi...post&p=15223226
read my post for a brief and quick explanation of why there is vdroop


wow, you finally found the thread huh? wasnt too hard right

get a better psu la ._.

anyway, its basically quite easy,

1) set 1:1 memory/fsb
2) pump fsb, if cannot pump more then 333, lower the multiplier by 1
3) pump voltage if fsb cannot pass 333
4) repeat steps 2 and 3, and watch for temps,

the rest... lazy to explain, someone will help you out haha

This post has been edited by bryanyeo87: Jan 25 2008, 02:07 AM

what PSU? model and brand would be better then 450w, because chap ayam also can put 600w

dont pump voltages first, pump fsb first, voltage is to stabilize the processor speed, and use voltage increments sparingly, if non at all

nola, the cpu will throttle only


kucingfight pukes at his gemini2 performance lolz

hyper212 is quite alrite, ur using that what bro?

another option for rm75 or so is evercool buffalo, lolz... a decent performer

what do u mean dying o_O?

keep the voltage below 1.5v and/or at the point of death, and then can claim warranty



thermalright ultra extreme 120