bro sniper, why u dun u bump ur fsb to 400mhz and reduce multiplier to 8x??? i thought most of conroe ocers prefer to have high fsb?? btw, 3.2ghz for e66 is confirmed stable @ stock voltage dun worry instead target for >3.6ghz

This post has been edited by ben_panced: Dec 13 2007, 10:47 AM

bro 5-6-6-20 seems a little too high..
why dun u lower the timings abit??

this is wierd..
normally e6300 wouldnt break a sweat @ 400mhz fsb..
btw.. did u flashed their latest bios..
abit has an habit of not updating their bios regularly -> this was my experience when i used their av8 mobo

here's mine..
note this is not the limit of my ram and cpu the max stable oc that i've obtained so far is 480mhz fsb
just the setting that i will use for everyday computing usage..
1.4375vcore, 2.1vdimm, 1.4vnb, 1.3v cpu vtt, 1.6v sb/io

occt test cpu n ram



superpi -> mine is kinda slow because im running other programs at the same time.. i will update my super pi later..

now i know why my superpi is so slow..
it's because i set the fsb strap at 800mhz
btw, this mobo uses jumpers for fsb strap change

noob's oc
superpi @ 3.5ghz e6300 b2
vcore: 1.45v vdimm:2.2v vnb:1.425v vfsb:1.325v vsb/io:1.6v vsb:stock
fsb strap @ 1333mhz



This post has been edited by ben_panced: Dec 27 2007, 04:06 PM