Jun 5 2022, 07:19 PM
QUOTE(Anime4000 @ Apr 4 2022, 11:13 PM)
This my final verdict on xPON ONU SFP Stick
There are 3 SFP Stick can be use on TM Fiber
1. VSOL V2801F (Stock Firmware)
2. TWC GPON657 (C00R657V2801F_V1.9.0-220404.tar)
3. ODI DFP-34X-2C2 (M114_sfp_ODI_220304.tar)
RTL9601CI
1. VSOL V2801F
2. TWC GPON657
RTL9601D
1. ODI DFP-34X-2C2
Stick Setup
Mikrotik
1. Remove sfp1 or sfp-sfpplus1 from bridge
2. Add sfp1 or sfp-sfpplus1 IP Address 192.168.1.100/24
3. Add sfp1 or sfp-sfpplus1 into WAN Interface Group
Now you can access 192.168.1.1 via 192.168.88.0/24 network via NAT!!!
Default Password
VSOL V2801F
admin, stdONU101
TWC GPON657
admin, system
ODI DFP-34X-2C2
admin, admin
Setup for TM Fiber
Login into telnet via 192.168.1.1
Authentication:
flash set GPON_SN HWTC99887766
flash set GPON_PLOAM_FORMAT 1
flash set GPON_PLOAM_PASSWD 1234567890
Authorized Model:
flash set PON_VENDOR_ID HWTC
flash set HW_HWVER 168D.A
flash set OMCI_FAKE_OK 1
Reboot it!
reboot
Check OMCI VLAN
Login into telnet via 192.168.1.1
TM-Maxis Example:
# omcicli mib get 84
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityID: 0x1202
FilterTbl[0]: PRI 0,CFI 0, VID 621
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0x1203
FilterTbl[0]: PRI 0,CFI 0, VID 821
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0x1204
FilterTbl[0]: PRI 0,CFI 0, VID 822
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0x120b
FilterTbl[0]: PRI 0,CFI 0, VID 621
FilterTbl[2]: PRI 0,CFI 0, VID 821
FilterTbl[4]: PRI 0,CFI 0, VID 822
FwdOp: 0x10
NumOfEntries: 3
=================================
=================================
EntityID: 0xe102
FilterTbl[0]: PRI 0,CFI 0, VID 209
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0xe10b
FilterTbl[0]: PRI 0,CFI 0, VID 209
FwdOp: 0x10
NumOfEntries: 1
=================================
2.5GbE Support
RB5009 did not support 2.5GbE via SFP!
Customer with 1Gbps subscription manage to get 1.7Gbps when using 2.5GbE Mode
https://www.speedtest.net/result/c/aabbfe75...c4-5fe4ca4d4999
Screenshot
ODI DFP-34X-2C2
[attachmentid=11129724]
[attachmentid=11129725]
TWC GPON657
[attachmentid=11129727]
[attachmentid=11129728]
More information can be found here: https://github.com/Anime4000/RTL9601C1
I spend my time on this since 2020!
I recommend ODI DFP-34X-2C2 because using newer SFP Body (less heat) and better SoC
Bro, any local "trusted" seller that sells the 3 xPON as you mentioned above?There are 3 SFP Stick can be use on TM Fiber
1. VSOL V2801F (Stock Firmware)
2. TWC GPON657 (C00R657V2801F_V1.9.0-220404.tar)
3. ODI DFP-34X-2C2 (M114_sfp_ODI_220304.tar)
RTL9601CI
1. VSOL V2801F
2. TWC GPON657
RTL9601D
1. ODI DFP-34X-2C2
Stick Setup
Mikrotik
1. Remove sfp1 or sfp-sfpplus1 from bridge
2. Add sfp1 or sfp-sfpplus1 IP Address 192.168.1.100/24
3. Add sfp1 or sfp-sfpplus1 into WAN Interface Group
Now you can access 192.168.1.1 via 192.168.88.0/24 network via NAT!!!
Default Password
VSOL V2801F
admin, stdONU101
TWC GPON657
admin, system
ODI DFP-34X-2C2
admin, admin
Setup for TM Fiber
Login into telnet via 192.168.1.1
Authentication:
CODE
flash set GPON_SN HWTC99887766
flash set GPON_PLOAM_FORMAT 1
flash set GPON_PLOAM_PASSWD 1234567890
Authorized Model:
CODE
flash set PON_VENDOR_ID HWTC
flash set HW_HWVER 168D.A
flash set OMCI_FAKE_OK 1
Reboot it!
CODE
reboot
Check OMCI VLAN
Login into telnet via 192.168.1.1
TM-Maxis Example:
CODE
# omcicli mib get 84
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityID: 0x1202
FilterTbl[0]: PRI 0,CFI 0, VID 621
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0x1203
FilterTbl[0]: PRI 0,CFI 0, VID 821
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0x1204
FilterTbl[0]: PRI 0,CFI 0, VID 822
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0x120b
FilterTbl[0]: PRI 0,CFI 0, VID 621
FilterTbl[2]: PRI 0,CFI 0, VID 821
FilterTbl[4]: PRI 0,CFI 0, VID 822
FwdOp: 0x10
NumOfEntries: 3
=================================
=================================
EntityID: 0xe102
FilterTbl[0]: PRI 0,CFI 0, VID 209
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0xe10b
FilterTbl[0]: PRI 0,CFI 0, VID 209
FwdOp: 0x10
NumOfEntries: 1
=================================
2.5GbE Support
RB5009 did not support 2.5GbE via SFP!
Customer with 1Gbps subscription manage to get 1.7Gbps when using 2.5GbE Mode
https://www.speedtest.net/result/c/aabbfe75...c4-5fe4ca4d4999
Screenshot
ODI DFP-34X-2C2
[attachmentid=11129724]
[attachmentid=11129725]
TWC GPON657
[attachmentid=11129727]
[attachmentid=11129728]
More information can be found here: https://github.com/Anime4000/RTL9601C1
I spend my time on this since 2020!
I recommend ODI DFP-34X-2C2 because using newer SFP Body (less heat) and better SoC
Quote
0.0180sec
0.22
7 queries
GZIP Disabled