@Anime4000

Just saw this awesome thread. I would like to clone my current HG8240H into my Huawei MA5671A( i have alcatel and nokia G010s sticks too)

What are the commands to get/echo current parameters on the HG8240 for the followings?

flash set OMCI_SW_VER1 V3R017C10S100
flash set OMCI_SW_VER2 V3R017C10S100
flash set GPON_ONU_MODEL HG8240H
flash set GPON_SN HWTC14211ED8
flash set PON_VENDOR_ID HWTC
flash set HW_HWVER BF9.A
flash set HW_CWMP_MANUFACTURER 'Huawei Technologies Co., Ltd'
flash set HW_CWMP_PRODUCTCLASS HGU

Thanks bro.

My ont is HG8240H when i login it is only a basic page with some basic info such as PLOAM password and SN. My SN is not HWTC or 48575.

It starts with E2B. Is this my GPON_SN?

My suspect there is another level of superuser for this ONT. i cannot download configuration file therefore backdoor to enable ssh/telnet is not possible?

Isp is time. Any info?

Didnt work.

Oh well, basically followed the instructions here and this is what i get from pink internet. Always wanted to get rid of the fugly default router and now my setup is cleaner with only 1 wifi router. Nothing "illegal" was done on my setup but just to clone the settings from original router to get the 05 status. Achieved 100mbps more using gpon instead of the speed loss using the default router.

i didn't follow exactly because somehow my settings on router is a bit different, eg SN and hardware/software version all different from this thread. Heck even my vlan is totally off compares to this. Basically i was cloning my old router details into gpon, esp the OMCI details because my area needed the OMCI aside from PLOAM password to register on pink system.