Huawei OptiXstar S800E XGS-PON SFP ONU

Could this work or I need to study more ?

I get hold of a used but untouched firmware for DFP-34X-2C3. According to this repo, and I'm on TIME Broadband, which of this in the repo should I flash?

https://github.com/Anime4000/RTL960x/tree/m...are/DFP-34X-2C2

In need of some advice here. This ODI SFP without media converter can I access to webui? I have a SFP switch and SFP router.

On router the SFP port interface do I set address 192.168.1.1/24 and my PC to within same subnet range?

On switch, I presume just the PC need 192.168.1.x/24 IP but the x just cannot be 1?

Both for the above, is it just head directly to web portal and key in http or https 192.168.1.1?

I bought an Ubiquiti router. Correct GPON SFP from few laying around earlier. The webui IP 192.168.1.1 for router and stick is the same . How to access the Stick GUI ? How to setup the Ubiquiti like static routing needed? The GPON doesn't go UP if fiber not connected ?

This post has been edited by ZJL: Aug 17 2025, 09:39 PM

Thanks everyone. I manage to successfully setup myself from reading and some logic senses.

ODI is the model of SFP bought from Alibaba.
Using Ubiquiti Dream Router 7

My earlier post was solved through latest Unifi OS update. The Combo WAN port is allowed to be change to LAN. I was stuck from not able to access the ODI web ui because LAN doesn't talk directly to WAN port even though on same subnet.

I figure out finally:
Setup Electrical WAN as main and temporary set Optical WAN as Common LAN to be part of the other 3x 2.5GE capable Electrical LAN.

Once solved that part, I manage to access ODI web gui and inser what was necessary.


This post has been edited by ZJL: Aug 24 2025, 11:12 PM

Some image of the Dream Router 7

Privacy related. Actual photo removed

This post has been edited by ZJL: Aug 24 2025, 11:12 PM