Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

Home Networking Ditch ONU, use GPON SFP on Business Grade Router, 2.5G ONU for Unifi & Maxis, NO NEED VLAN

views
     
System Error Message
post Dec 13 2023, 12:06 PM

Regular
******
Senior Member
1,781 posts

Joined: Jul 2010
QUOTE(chong601 @ Dec 13 2023, 09:24 AM)
I have returned.

I have a bad news.

So starting from September, I get constant packet loss issue whenever my uploads are close to Gigabit and sometimes it will terminate the PPPoE session and re-establishes pretty soon after.

Two months of back-and-forth with TM yields nothing but constant frustration and two fiber repairs that cost me RM 150 each as well as unsolved case.

I got fed up and finally reported to MCMC on November 10 and told them that they kind of already given up with this because even the TMpoint peeps at IOI City Mall told me to report to MCMC after they saw the ticket status.

It is now one month since that and TM did not reply to my MCMC complaint.
SOOOOOOO with that, I have created a beautiful website called https://howfuccedis.my/ping/charts to show them how it looks like from the customer point of view about the internet experience.

These charts are 100% live and interactive, and instructions on how to utilize the chart interaction are included. History should go up to one month back (except on Optiplex 5050 because I just recently updated the router, so the chart data is gone)

Network is something like this:
user posted image
For everyone here, enjoy the shitfuckery known as UniFi """""Ultra""""" Experience!

For TM people that lurks here, hi, and CAN YOU FIND SOMEONE COMPETENT ENOUGH TO LOOK AT MY ISSUE. My MCMC report ID is TC231110-00050.

Edit: updated network map
*
i have a similar switch but with POE instead. can see everyone is already pounding your network to view your usage.
May want to consider streaming to an external host and everyone can view from that instead.
System Error Message
post Dec 13 2023, 03:44 PM

Regular
******
Senior Member
1,781 posts

Joined: Jul 2010
QUOTE(chong601 @ Dec 13 2023, 02:23 PM)
Nah it's fine, this is one of the host VPN tunnel where the chart is being streamed.
user posted image

Those traffic you see are from my own simulated uploads for them to check out anytime they want.
I can try, but that would need me to think how to stream that nicely....
Added my latest log below.

But if you want a quick excerpt of the logs....
CODE
vyos@vyos:~$ journalctl -eu ppp@pppoe0 | grep "LCP terminated"
Dec 13 07:05:21 vyos pppd[113758]: LCP terminated by peer
Dec 13 07:34:49 vyos pppd[113758]: LCP terminated by peer
Dec 13 07:43:37 vyos pppd[113758]: LCP terminated by peer
Dec 13 07:59:25 vyos pppd[113758]: LCP terminated by peer
Dec 13 08:11:13 vyos pppd[113758]: LCP terminated by peer
Dec 13 08:34:40 vyos pppd[113758]: LCP terminated by peer
Dec 13 09:07:07 vyos pppd[113758]: LCP terminated by peer
Dec 13 10:13:54 vyos pppd[113758]: LCP terminated by peer
Dec 13 13:10:22 vyos pppd[113758]: LCP terminated by peer
Dec 13 13:54:50 vyos pppd[113758]: LCP terminated by peer
vyos@vyos:~$ journalctl -eu ppp@pppoe0 | grep "No response"
Dec 13 05:05:17 vyos pppd[4737]: No response to 3 echo-requests
Dec 13 05:16:04 vyos pppd[4737]: No response to 3 echo-requests
Dec 13 05:42:11 vyos pppd[4737]: No response to 3 echo-requests

*
seems often but not too often. One thing that could help if your network is overloaded is QoS but i know its easy to do with mikrotik via L2 and L3 but im not sure how well linux handles seperating l2 and L3 queues and priorities.
Sometimes LCP terminated by peer can happen due to an error. Wireshark or sniffing can help, log and filter by packet type. The main way i figure out how TM lock me out of things is by sniffing against their provided equipment and then copying what i can including mac address.

 

Change to:
| Lo-Fi Version
0.0793sec    0.29    7 queries    GZIP Disabled
Time is now: 4th December 2025 - 01:27 AM