If you’re not an enterprise user, consider getting the BE800 and make an AIO with that using the SFP+ ONU

He need to upgrade all of the NIC to minimum 2.5G as well

If you’re upgrading, might as well just cut out more things to reduce the point of failure
You meant *cough* Cat6A, and tell that to the residential Cat6A and above connoisseur in this forum

I come from the TM UniFi thread.

Anyone use the 2Gbps Unifi in business environment with own router? TM offered me free upgrade to 2Gbps package, but I would like to use our router/firewall instead of their router.
Specifically, Sophos XG210.

We are currently using 800Mbps with 5 fixed IP where the router/firewall do the PPPoE.

since this 2.5GbE, yea,

it should be support all plan since ONR no longer life time warranty 😅

Yea, for now is blank or someone generic case to reduce cost.

pricing should be cheaper than PON Stick.

firmware update can request directly to me, once very stable,. firmware will be less frequent, security should be ok as this ONU only do bridge.

since same SDK as PON Stick and D-Link, the EU guy give HGU Firmware since this ONU can support Router Mode, I need modify to support only Bridge.

D-Link DPN-FX3060V and PON Stick stuff ported to this ONU.

by default Emulate D-Link and report as D-Link B1 to OLT,

Should support TIME, Maxis own Infra and Allo by changing OLT Mode and reboot

My prediction is right, TM now follow TIME footsteps, all ONR, if you want to untag VLAN on your existing ONR, you need make a report, then technician come to your place to make a change.

This should fix user can't bridge on existing ONR.

What I been told, when Bridge Mode and VLAN untagged, the ONR will like ONT (no WiFi, no NAT).

to support my ONU Bridge, VoIP VLAN can be requested to untagged or bridge to UNI LAN 1 0x101 instead of UNI VEIP 0xe01 (ME 171 FwdOp rules)

all ONR will be controlled with this TM new system:
Screenshot Eradicated

If you using ONR and are concerned about privacy or control, it's better to use old ONT, or using my ONU Bridge Box for autonomy with your own network.

Yes, for 1/2Gbps plan.
if non Ultra, better buy used BTU from marketplace like Carousel

My ONU Bridge Box should works with TIME, as same modification from the stick, both use NIJIKA Firmware.

since I had remove the screenshot leak,.but this what TM is going:


TM plan to automation, monitor all ONR