Hey, sorry didn't see this thread.

Thanks for including my video.

I'm folding in Team Malaysia https://folding.extremeoverclocking.com/use...t.php?s=&t=2999

No.

My RX 5700 XT does about 1.1mil PPD depending on work load.

RTX 2070 does 1.3mil PPD.

So you can estimate RX 5700 XT is around RTX 2060.

RX 5600 XT I believe should be around GTX 1660 or less.

Np np, I'm always tracking PPD.

At least Navi works now. Last year Navi wasn't even working.

Also Ryzen Threadripper 3960X does about 350k PPD.

Pretty neat, 4x 3080 Ti alone used unit will cost RM 10K already and does 24 - 28 PPD range.

That's how I calculated 4x 3080 Ti for 10K.

No la, was trying out single RTX 3080 Ti.

Got other cards running too, like RX 6600 XT.

RX 6600 XT is soooooooooooo much better than 6900 XT.

I'm disappointed 6900 XT can't get much better PPD even though it's a really strong gaming card.

6600 XT I get anywhere from 1.3mil to 1.8mil PPD.

I see reports of 6900 XT gettting 2.5mil at https://folding.lar.systems/gpu_ppd/brands/...deon_rx_6900_xt

I couldn't believe it until I tried it. That's why disappointing, since the 6900 XT is a much stronger card by many levels.

Check out my latest PPD update!

Solo RTX 4090, just started on Sunday.

25M PPD 360W, some WU is about 12mil 240W.

16.2M probably because it folding not on reset time.

25,000,000 for 360W is insane @ 69,444 per watt! ZOMG

360W as mentioned on post. Load is not 100%, I think is software limitation.

The GPU at 360W with all that chunk of heatsink, just hovers around 70c range+/- without fan screaming.

I've been folding for SO many years, this is the first time I'm like WU finish so fast ah? Oh started new one ah? OK it'll be finishing soon anyway.

RTX 3080 Ti just runs hot and some 6mil ish PPD only.

Insane really.

Not even looking at RTX 4080 now, considering it has below 10K CUDA cores and this one has some 16K+.

If I go time I willl try. 3080 Ti sitting in box now.

I tell you this RTX 4090 is so good I feel like buying one.

Super value for PPD.

IKR!?!?!?

30s TPF, if you're a folding veteran you would certainly appreciate this considering we've never seen TPF that's less than 60 seconds, not that I could remember.

And doing all this in just sub 70c and below 400w - WHAT!?!?!