Outline ·
[ Standard ] ·
Linear+
Intel Pentium Dual Core E2140/E2160/E2180 Thread, Discussion & Compilation
|
iman_210
|
 Mar 3 2008, 04:43 PM
|
|
QUOTE(Amedion @ Mar 2 2008, 01:27 PM) LOL... Just now I maxed out all the voltage... 100% OC straight away freeze... Guess my processor can't get 100% OC though... Vcore in CPU-z reading @ 1.776v MCH @ +0.3v FSB @ +0.3v RAM @ 2.4v very high vcore...
Added on March 3, 2008, 4:48 pmQUOTE(cyberfly @ Mar 3 2008, 12:04 PM) You can view his guide here : http://forum.lowyat.net/topic/623648someone should put the link at the first post,first page of the thread. not many forumers notice about the Essential Guide section. is it safe Kingston value ram running at 2.1v?might try with my Kingston Value Ram  yup essentila guide should be put up to avoid repeating troubleshootings.... This post has been edited by iman_210: Mar 3 2008, 04:48 PM |
|
|
|
|
|
flatfinger
|
Mar 3 2008, 05:03 PM
|
|
|
QUOTE(Dreamworks @ Mar 3 2008, 04:39 PM) @tech_frix But don't blame me if it doesn't work  I'm just sharing based on my experience... Last time my FSB got stucked at 200MHz no matter what I do/set in BIOS, Reset/Shutdown/etc. didn't make the new clock take effect until I disconnected the AC Power and reconnect again  no need to unplug the AC power...after set ur OC setting...boot into window...then shutdown the pc...off the main power psu button...press the pc power button to discharge...wait a bit 10s-15s...then power back on...it should be ok... |
|
|
|
|
|
Dreamworks
|
Mar 3 2008, 05:16 PM
|
|
|
QUOTE(flatfinger @ Mar 3 2008, 05:03 PM) no need to unplug the AC power...after set ur OC setting...boot into window...then shutdown the pc...off the main power psu button...press the pc power button to discharge...wait a bit 10s-15s...then power back on...it should be ok... Almost the same ma, the objective is to completely cut power to the mobo... Some PSUs don't come with a switch at the back though  By the way, you're using a DS3 right? Did you face problems similar to me after using EasyTune 5 Pro? Does Memset work for you? This post has been edited by Dreamworks: Mar 3 2008, 05:17 PM |
|
|
|
|
|
flatfinger
|
Mar 3 2008, 05:21 PM
|
|
|
QUOTE(Dreamworks @ Mar 3 2008, 05:16 PM) Almost the same ma, the objective is to completely cut power to the mobo... Some PSUs don't come with a switch at the back though By the way, you're using a DS3 right? Did you face problems similar to me after using EasyTune 5 Pro? Does Memset work for you? hehhe..ya lorr...which problem that u point to when using ET5pro??? im not yet tweaking the ram using memset...coz still waiting my ballistix come back from RMA...now just OC saja2x...using value ram...pinjam some more doing 3.33GHz with loose timing...i think can go higher..just rite now i dont wanna push the vcore... This post has been edited by flatfinger: Mar 3 2008, 05:31 PM |
|
|
|
|
|
Dreamworks
|
Mar 3 2008, 05:32 PM
|
|
|
EasyTune 5 Pro is the one that caused my FSB to get stucked, maybe I changed the settings too many times in Windows or something just went plain wrong  Memset... No comment... Run the program, then close it without changing/saving any settings. Restart my PC, failed to POST! And everything gets restored to default Value RAMs also not that bad in OC ma, some more so cheap only. I got mine for RM65 per GB |
|
|
|
|
|
a1098113
|
Mar 3 2008, 06:04 PM
|
|
|
memset is an awesome software  Abits softmenu is nice to play with |
|
|
|
|
|
Amedion
|
Mar 3 2008, 06:38 PM
|
|
|
QUOTE(flatfinger @ Mar 3 2008, 05:21 PM) hehhe..ya lorr...which problem that u point to when using ET5pro??? im not yet tweaking the ram using memset...coz still waiting my ballistix come back from RMA...now just OC saja2x...using value ram...pinjam some more doing 3.33GHz with loose timing...i think can go higher..just rite now i dont wanna push the vcore... Bro, just wondering if Crucial Ballistix DDR667 CL3 can do DDR800 CL3 or not? OR the DDR800 CL4 can do DDR800 CL3? |
|
|
|
|
|
a1098113
|
Mar 3 2008, 06:55 PM
|
|
|
it depends on the chip they use la. IF its the same chip as the team extreem 1066Mhz cl4, then maybe its possible.
|
|
|
|
|
|
Amedion
|
Mar 3 2008, 07:12 PM
|
|
|
QUOTE(a1098113 @ Mar 3 2008, 06:55 PM) it depends on the chip they use la. IF its the same chip as the team extreem 1066Mhz cl4, then maybe its possible. Team Xtreem freakin' expensive.. |
|
|
|
|
|
tkh_1001
|
Mar 3 2008, 07:34 PM
|
|
|
QUOTE(tech_frix @ Mar 3 2008, 03:23 PM) cpu z and orthos...and i look at My Computer properties sumore... d function dat sumone told b4 takde @Abit mobo... i looked everywhr edy...takkan stuck @x9 multi??!!!  erm...just a guess... do this mobo need to press ctrl+F1 then only can find C1E n EIST ? QUOTE(Dreamworks @ Mar 3 2008, 05:32 PM) EasyTune 5 Pro is the one that caused my FSB to get stucked, maybe I changed the settings too many times in Windows or something just went plain wrong Memset... No comment... Run the program, then close it without changing/saving any settings. Restart my PC, failed to POST! And everything gets restored to default Value RAMs also not that bad in OC ma, some more so cheap only. I got mine for RM65 per GB same problem for me here.. mine will crash after the window load whenever i set new timings in BIOS... in the end i realised that i have to "delete save" then only can set new timings at BIOS |
|
|
|
|
|
flatfinger
|
Mar 3 2008, 07:45 PM
|
|
|
QUOTE(Amedion @ Mar 3 2008, 06:38 PM) Bro, just wondering if Crucial Ballistix DDR667 CL3 can do DDR800 CL3 or not? OR the DDR800 CL4 can do DDR800 CL3? can do but must over voltage...which is not recommended... |
|
|
|
|
|
heizad
|
Mar 3 2008, 07:51 PM
|
|
|
1st time reach 3.0GHz and above  didn't do the stress test yet..maybe tonite  » Click to show Spoiler - click again to hide... « |
|
|
|
|
|
flatfinger
|
Mar 3 2008, 07:55 PM
|
|
|
QUOTE(heizad @ Mar 3 2008, 07:51 PM) 1st time reach 3.0GHz and above didn't do the stress test yet..maybe tonite » Click to show Spoiler - click again to hide... « what is ur vbios, vdrop n vdroop?? |
|
|
|
|
|
a1098113
|
Mar 3 2008, 07:59 PM
|
|
|
bro i think his one is a gigabyte board la.. look at the clock speed and the voltage i agak its a typical DS3 la.. hmm i might be wrong. That a very high voltage for just 350Mhz on the bus |
|
|
|
|
|
Amedion
|
Mar 3 2008, 08:00 PM
|
|
|
QUOTE(heizad @ Mar 3 2008, 07:51 PM) 1st time reach 3.0GHz and above didn't do the stress test yet..maybe tonite » Click to show Spoiler - click again to hide... « If that is the vdrop voltage.. 1.447v.. Then it's kinda high already.. AND why my handphone number inside the screen shot?  |
|
|
|
|
|
a1098113
|
Mar 3 2008, 08:02 PM
|
|
|
so we all can call u and kacau you la, what else true, its too high for just 350Mhz :s |
|
|
|
|
|
Amedion
|
Mar 3 2008, 08:05 PM
|
|
|
QUOTE(a1098113 @ Mar 3 2008, 08:02 PM) so we all can call u and kacau you la, what else true, its too high for just 350Mhz :s Yaka? I'm no leng lui.. What for? Mine running 3.2Ghz @ 1.38v .. NO problem so far.. Haven't stress..  |
|
|
|
|
|
flatfinger
|
Mar 3 2008, 08:24 PM
|
|
|
QUOTE(Amedion @ Mar 3 2008, 08:05 PM) Yaka? I'm no leng lui.. What for? Mine running 3.2Ghz @ 1.38v .. NO problem so far.. Haven't stress.. yeah should be no prob...3.2GHz@1.376v n 3.3GHz@1.42v... |
|
|
|
|
|
a1098113
|
Mar 3 2008, 08:27 PM
|
|
|
standard stuff la, exponential increase of Vcore havent come into play yet |
|
|
|
|
|
Dreamworks
|
Mar 3 2008, 08:42 PM
|
|
|
Lookie here...  I managed to clock a bit higher at lower vCore... I have a weird proc 3136MHz 
3.14GHz@1.350v failed ORTHOS in 17 minutes 3.15GHz@1.325v failed ORTHOS in 5 hours 3.16GHz@1.375v failed ORTHOS in 22 minutes WTH?!? 
Added on March 3, 2008, 8:43 pmBy the way, the first core is the first one to fail again... Everytime!  This post has been edited by Dreamworks: Mar 3 2008, 08:43 PM |
|
|
|
|
Quote
0.0162sec
0.45
6 queries
GZIP Disabled