All value RAM shouldn't have problem with 2.1v.. Even me use 24/7 also pump 2.2v ..
IF those cannot handle 2.1v.. Then better fry it ASAP and buy new 1..

By changing it doesn't mean can stable at 333FSB..
But when I think about it... Ur ram shouldn't have problem with that FSB @ default voltage and timing..
TEmperature also ok .. What's wrong ar?
You got the worst m0 processor?

Try run x8 multiplier and use single RAM enuff.. Value RAm not meant for Dual Channel with high OC..

nobody want to help me ka??

if u planning to go 333 FSB and the ram multplier is 2,then no need to change the ram volt.leave it at default.
default volt for kingston value ram is 1.8v.
just set the timing to 5-5-5-15.
correct me if im wrong.

I dunno how to help ..

AS long as the clock speed is the same .. Then okay already lar..

Make sure ur program and bios all up to date..

er,what is your motherboard?
or did i miss something?
but as Amedion said,as long as your clock speed meet what you want,then its ok

Wah strange But how's the core speed when you're in Windows?

what board u running arr?? if ds3..
have u already disable the C1E n EIST feature
then set ur performance Enhance = Standard

This post has been edited by flatfinger: Mar 3 2008, 02:23 PM

thank q thank q!!!!
ok my mobo is Abit IP35-E n bios is v14...
need to disable anythng ka??
my proc still showing x9 for multi...
but my bios showing d speed @x8 multi...
so how can i use x8 multi???

u already disable the C1E n EIST or not???
broswe into ur bios...then disable it

This post has been edited by flatfinger: Mar 3 2008, 03:02 PM

I guess both of that option is lowering the multiplier.. Not increasing..

MAybe u turn on some kinda turbo function?

Abit oso got the turbo function meh??
by the way tech_frix...u read ur multiplier where?? cpu-z??? orthos???

This post has been edited by flatfinger: Mar 3 2008, 03:17 PM

cpu z and orthos...and i look at My Computer properties sumore...
d function dat sumone told b4 takde @Abit mobo...
i looked everywhr edy...takkan stuck @x9 multi??!!!

Okay.. What about the clock speed? IS it the same?

can u give ur screenies on cpu-z, orthos, n comp properties...

ok2...i think dat will help a lot...
will post tonite k??
thanks!!!!

d clock speed oso different..
for example i do 300*8 but then d speed will be @300*9...
really piss me off...reset my jumper edy...will continue tonite..

Here's what you can do... Power off your system and disconnect the AC power cord for about 10 seconds, then reconnect and power on. Your PC should do a double POST or whatever you call it, check your Multi. It should be correct now

I experienced something similar with my DS3R, but mine is a "stucked" FSB instead of Multiplier

dat i neva test b4...just reset my cmos oni...
will try dat tonite and post somthng here..
but it really butt me offfff!!!
wanna try my mobo max fsb!!!

Last night didn't sleep till morning.. Got problems setting up my rig..

Turns out to be that my Palit graphic card fan cooler was tooo big.. and it hit the southbridge heatsink >_< so i try carefully to slot in the graphic card and manage to put it.. and can't put it in fully. So i think if i can make it run, then it's ok..

After that i can get it on.. then another problem occur... my CD drive got problems... can't eject.. after spending times finding paperclip, luckily found one...

Then after installing windows, when i wanna install the motherboard driver,
and wtf.. the driver was DVD =.= ...

So i had to copy the driver from my friends DVD rom to my USB.. and can get it to install...

After work today gona fiddle on setting up for stock OC...

@tech_frix
But don't blame me if it doesn't work I'm just sharing based on my experience...

Last time my FSB got stucked at 200MHz no matter what I do/set in BIOS, Reset/Shutdown/etc. didn't make the new clock take effect until I disconnected the AC Power and reconnect again

This post has been edited by Dreamworks: Mar 3 2008, 04:41 PM