i not sure if take ds3 for example...the vmch option is +0.01, +0.02 n +0.03...but there's a problem...ds3 don't have vmch sensor...so we dont know what's the vmch reading...
my previous E8400 no need to change the vmch or vfsb when i clocked it to 4.0GHz (9x445) with biostar TP35D2-A7 board
not reliable...

This post has been edited by flatfinger: Mar 2 2008, 04:06 PM

My E8400 last time can't even stable 3.92ghz with 1.42v.

Forget CM psus.. anything below 450W of their series, its just..

Woot, flattie, your wolfsdale cun ah. I dont like GGByte anyways

last time la..sold already..hate the temperature bug...4.0GHz@ 1.36v...all others setting default...only rise vcore..
not so cun lor....max stable i can do 4.2GHz@1.42v....can boot n run SP1M @4.5GHz but not stable...other ppl can do much2x better than me.. but still i dont see any E8400@LYP here stable at 4.5GHz...still waiting...

in term of vdrop n vdroop...Giga board is really suck...missed my Biostar board already..

This post has been edited by flatfinger: Mar 2 2008, 04:37 PM

bro....bored de with da mobo? sell to me

quick question here...
y r every time i lower my multi to 8x @bios, when i save it and run my cpu it still stated 9x...
any idea guys??

huhu, where does it say it 9*? orthos? or coretemp? or cpu-z?

I sell you I use what?

Orthos always show default multiplier.. Other program I dunno.. as long as it's running at the correct clock speed then it's ok ..

aoinatsume's e8400 does that what

use ip35e lor, or go for mars lor

IP35E ar? Downgrade also a good idea ..

Anyone? I just use few days only.. Price must come close to brand new..

nope...yes his chip can do 4.5GHz....but Aoi never post a screenies 4.5GHz stable...correct me if i missed it..

all of d above..and for example i do 300*8 but in My Computer properties showed my speed different...
then how r??

Just now pumped 1.780v on vcore.. Found out that my motherboard cannot over 440Fsb.. Must use x9 multiplier.. 3.6Ghz no problem but 85c beep beep beep.. LOL

Hello guys,

Just got my new spec:
E2160 M0 stepping
Gigabyte p35-DS3
1GB Kingston value 667mhz x2
Enermax Tomahawk 500W


Setting i did:
Disable 3 items in Advance Bios setting. forgot what are those, some power saving thingy
FSB: 310
Multiplier: 9x
RAM ratio: 2.00
PCI-E Mhz: 100MHz
Vcore: default, but not auto.

Tried 325 fsb, run 15 minutes orthos and it hang
Any advice??

This post has been edited by F1meteor: Mar 3 2008, 11:56 AM

how about your ram timing?did u set to auto?
Anyway,reading Kmarc guide may solve your problem

Set the RAM ratio to 2.00 which is 1:1 ...
Timing to 5-5-5-15.. Voltage 2.1v shouldn't be a problem..

erm, ram timing i think it default lo.. 5-5-5-15
where can i find Kmarc guide?

Yea, the RAM ratio is set to 2.00
Forgot to mention in first post
And also the don't know what set to 100 lol.. i forgot what edi.. haha

PCI-E Mhz set to 100MHz..
You put default.. Later the timing become dunno wat.. Better manually set it to 5-5-5-15 @ 2.1v..
Btw, monitor the temperature.. How many at full load?

You can view his guide here :
http://forum.lowyat.net/topic/623648

someone should put the link at the first post,first page of the thread.
not many forumers notice about the Essential Guide section.


is it safe Kingston value ram running at 2.1v?might try with my Kingston Value Ram

yea yea.. the PCI-E is indeed set to 100mhz edi.. this is the 100 i'm talking about

The 2.1v is not default?
By changing this can go 333 FSB?

erm, right now temp at idle can be @ 40C
Orthos 10 mins, 61C or 62C only..