Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
138 Pages « < 111 112 113 114 115 > » Bottom

Outline · [ Standard ] · Linear+

 Intel Pentium Dual Core E2140/E2160/E2180 Thread, Discussion & Compilation

views
     
Amedion
post Mar 2 2008, 01:07 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
QUOTE(a1098113 @ Mar 1 2008, 08:08 PM)
u should be happy what smile.gif the vdroop got lesser, thus making u utilize every Vcore u can pump in smile.gif
*
QUOTE(Dreamworks @ Mar 1 2008, 09:35 PM)
Happens to my DS3R as well at times, heck... Even the 3-pin fan output voltage isn't constant shakehead.gif

But the lower the vdroop, the better.
*
Now that it get back to the previous 1... Zzzzz... Stupid motherboard ! vmad.gif

I will Vmod it once I found the guide and tools..

QUOTE(sparrowed @ Mar 1 2008, 11:28 PM)
nice temperature there, i cant get 3.2Ghz as my 2160 hitting 72C high (and it still rising). the max i can safely clock is 3.104Ghz @ 1.30Vcore which produce 68C degree. Is that stock heatsink that bad?
*
Me 3163MHz already hitting 70c ~ 74c .. doh.gif
Silverfire
post Mar 2 2008, 01:08 PM

Cruxiaer
*******
Senior Member
4,947 posts

Joined: Nov 2007
QUOTE(Amedion @ Mar 2 2008, 01:07 PM)
Now that it get back to the previous 1... Zzzzz... Stupid motherboard !  vmad.gif

I will Vmod it once I found the guide and tools..
Me 3163MHz already hitting 70c ~ 74c ..  doh.gif
*
Keke, now my Asus Triton 70 lets my 400x8 E2160 stays below 65'C CPU and 68'C Core.
Amedion
post Mar 2 2008, 01:11 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
QUOTE(Silverfire @ Mar 2 2008, 01:08 PM)
Keke, now my Asus Triton 70 lets my 400x8 E2160 stays below 65'C CPU and 68'C Core.
*
Not very good lar wei ! Change to other cooler lar.. laugh.gif
Silverfire
post Mar 2 2008, 01:14 PM

Cruxiaer
*******
Senior Member
4,947 posts

Joined: Nov 2007
QUOTE(Amedion @ Mar 2 2008, 01:11 PM)
Not very good lar wei ! Change to other cooler lar..  laugh.gif
*
Actually don't touch 70'C good enough for me liao... Even when gaming the temp only below 50'C.

This post has been edited by Silverfire: Mar 2 2008, 02:42 PM
suicideroach
post Mar 2 2008, 01:21 PM

kiss mah a^^
******
Senior Member
1,494 posts

Joined: Dec 2005
From: Wangsa Maju



hehehe... even my tiny stock cooler can barely reach 70C on load at 3ghz laugh.gif
Amedion
post Mar 2 2008, 01:27 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
LOL... Just now I maxed out all the voltage... 100% OC straight away freeze... Guess my processor can't get 100% OC though...

Vcore in CPU-z reading @ 1.776v
MCH @ +0.3v
FSB @ +0.3v
RAM @ 2.4v
Silverfire
post Mar 2 2008, 01:32 PM

Cruxiaer
*******
Senior Member
4,947 posts

Joined: Nov 2007
QUOTE(Amedion @ Mar 2 2008, 01:27 PM)
LOL... Just now I maxed out all the voltage... 100% OC straight away freeze... Guess my processor can't get 100% OC though...

Vcore in CPU-z reading @ 1.776v
MCH @ +0.3v
FSB @ +0.3v
RAM @ 2.4v
*
WAH! You want your PC burst? rclxub.gif rclxub.gif rclxub.gif
You're using P35-DS3 right? FSB and MCH no need to overvoltage if FSB is at 1600.
suicideroach
post Mar 2 2008, 01:36 PM

kiss mah a^^
******
Senior Member
1,494 posts

Joined: Dec 2005
From: Wangsa Maju



@Amedion

wah u gila apa? laugh.gif got bored with ur E2160 already ka, kawan? doh.gif
Amedion
post Mar 2 2008, 01:37 PM

It's a bird! No, it's a plane! No, it's star
*******
Senior Member
3,377 posts

Joined: Jul 2005
From: Klang
QUOTE(Silverfire @ Mar 2 2008, 01:32 PM)
WAH! You want your PC burst? rclxub.gif  rclxub.gif  rclxub.gif
You're using P35-DS3 right? FSB and MCH no need to overvoltage if FSB is at 1600.
*
Aiya... Just maxed out everything lor.. Later freeze I dunno wat problem.. Now i know my processor cannot 100% OC.. sweat.gif

Or Maybe my PSU can't provide enuff voltage !? doh.gif

Added on March 2, 2008, 1:38 pm
QUOTE(suicideroach @ Mar 2 2008, 01:36 PM)
@Amedion

wah u gila apa? laugh.gif got bored with ur E2160 already ka, kawan? doh.gif
*
OC till boring ma.. Want see some smoke for fun .. laugh.gif

This post has been edited by Amedion: Mar 2 2008, 01:38 PM
flatfinger
post Mar 2 2008, 03:08 PM

Totally Retired
*****
Senior Member
925 posts

Joined: Jan 2005
From: depan lcd...dalam bilik..sekitar cyberjaya...
QUOTE(Amedion @ Mar 1 2008, 07:32 PM)
Aiyo.. Dunno what happened to my motherboard..

All these while the vdroop is 0.0675v ... Today suddenly become 0.0275v.. Headache ah ~ !
*
Giga mobo always have high vdrop n vdroop...
mine also OC @3.2GHz in bios selected 1.45v...pc health 1.41v...vdrop will be 1.39v...vdroop 1.376v....see the margin sweat.gif sweat.gif
Currently running at 3.33GHz with in bios selected 1.5v.....pc health 1.47v...vdrop at 1.456v....vdroop at 1.424v...see the margin again
user posted image
QUOTE(anggajaya @ Mar 2 2008, 01:29 AM)
LOL, ive jus realised that using kIngston Value rams is on par with my Ballistix...

I am jus talking the super Pi1m result, lIke this
Before i bought kingston rams, I tested my E2160 with my Ballistix before.
I was running at 387x8 at 1.425 and My ballistix ran at ddr2 1000 with timing 5-5-5-10, My superPi1m result Got around 20. 100 secs.
when I tested my kingston value rams, I ran all same speeds except the ram speed and timing. it was running at DDR2 832 with timing 4-4-4-12,
and guess wat, I got 19.700 secs on Super PI1m....
and fyi, iam also talking abt the most stable settings on My E2160 at 1.425..
both settings and both rams passed orthos in 13 hours. seriously guys ABit Ip35-E rocksssssssssssss, I love this board...... seriously really worth of money.....
btw guys, any idea abt this matter... iam jus getting started to think that buying High performance rams aint that necessary... unless Perhaps U do some extreme overclocking... perhaps
*
CL4 n CL5 there is so much different....just remember 4-4-4-12@800MHz is faster than 5-5-5-12@1000MHz

QUOTE(Amedion @ Mar 2 2008, 01:27 PM)
LOL... Just now I maxed out all the voltage... 100% OC straight away freeze... Guess my processor can't get 100% OC though...

Vcore in CPU-z reading @ 1.776v
MCH @ +0.3v
FSB @ +0.3v
RAM @ 2.4v
*
hohohoh...in bios u select max vcore rite...mean vdrop will read 1.776v only...
after the giga board "kaput"....buy Abit Ip35-E lor... cool2.gif

This post has been edited by flatfinger: Mar 2 2008, 03:20 PM
PleaseEnterYourName
post Mar 2 2008, 03:20 PM

Casual
***
Junior Member
386 posts

Joined: Jan 2006
From: between 0 and 1
Guys, got any recommendation for HSF and PSU? Mmmm can the PSU not more than RM100?

Sad, can't pasang my computer yet.. no time to go buy graphic card.. working also now >_<

Hmmm think have to take break and go buy lolz..
flatfinger
post Mar 2 2008, 03:36 PM

Totally Retired
*****
Senior Member
925 posts

Joined: Jan 2005
From: depan lcd...dalam bilik..sekitar cyberjaya...
QUOTE(PleaseEnterYourName @ Mar 2 2008, 03:20 PM)
Guys, got any recommendation for HSF and PSU? Mmmm can the PSU not more than RM100?

Sad, can't pasang my computer yet.. no time to go buy graphic card.. working also now >_<

Hmmm think have to take break and go buy lolz..
*
HSF is u got budget go for Xigmatek...other Thermalright, CM GeminII, Hyper 212, Tuniq less budget maybe Asus Triton70..
bro hard to find good PSU less RM100...got "aku comel" which is not recommended is u wanna OC...

This post has been edited by flatfinger: Mar 2 2008, 03:45 PM
tkh_1001
post Mar 2 2008, 03:42 PM

Look at all my stars!!
*******
Senior Member
2,547 posts

Joined: Oct 2007
QUOTE(suicideroach @ Mar 2 2008, 01:36 PM)
@Amedion

wah u gila apa? laugh.gif got bored with ur E2160 already ka, kawan? doh.gif
*
its not he bored with his proc, its he bored with his mobo already baru ngam laugh.gif laugh.gif

QUOTE(Amedion @ Mar 2 2008, 01:37 PM)
Aiya... Just maxed out everything lor.. Later freeze I dunno wat problem.. Now i know my processor cannot 100% OC..  sweat.gif

*
if want to 100 % OC then u have to get e2140 brows.gif want to get from me? tongue.gif laugh.gif
Silverfire
post Mar 2 2008, 03:43 PM

Cruxiaer
*******
Senior Member
4,947 posts

Joined: Nov 2007
QUOTE(flatfinger @ Mar 2 2008, 03:36 PM)
HSF is u got budget go for Xigmatek...other Thermalright, CM GeminII, Hyper 212, Tuniq less budget maybe Asus Triton70..
bro hard to find good PSU less RM100...got "akuk comel" which is not recommended is u wanna OC...
*
"Akuk comel"?
flatfinger
post Mar 2 2008, 03:44 PM

Totally Retired
*****
Senior Member
925 posts

Joined: Jan 2005
From: depan lcd...dalam bilik..sekitar cyberjaya...
QUOTE(Silverfire @ Mar 2 2008, 03:43 PM)
"Akuk comel"?
*
i-cute laugh.gif laugh.gif laugh.gif laugh.gif
a1098113
post Mar 2 2008, 03:45 PM

~Retired~
*******
Senior Member
3,119 posts

Joined: May 2007
From: Home
the ggbyte no need to up the Vmch coz its already pumped for your benefit.. memang gila la, main 1.776V... brows.gif


flatfinger
post Mar 2 2008, 03:47 PM

Totally Retired
*****
Senior Member
925 posts

Joined: Jan 2005
From: depan lcd...dalam bilik..sekitar cyberjaya...
QUOTE(a1098113 @ Mar 2 2008, 03:45 PM)
the ggbyte no need to up the Vmch coz its already pumped for your benefit.. memang gila la, main 1.776V... brows.gif
*
from my experience...if u r not passing the 400fsb barrier...u won't need to rise up vmch or vfsb...

This post has been edited by flatfinger: Mar 2 2008, 03:48 PM
a1098113
post Mar 2 2008, 03:49 PM

~Retired~
*******
Senior Member
3,119 posts

Joined: May 2007
From: Home
even so bro, what choices of Vmch are there in the GGbyte board.. not mistaken the first choice after default is 1.50V rite.. For myself, i dont need to up my Vmch until 430Mhz.
Silverfire
post Mar 2 2008, 03:53 PM

Cruxiaer
*******
Senior Member
4,947 posts

Joined: Nov 2007
I see, but last time I do my E8400 400x9 already need pump FSB n MCH voltage.
PleaseEnterYourName
post Mar 2 2008, 03:59 PM

Casual
***
Junior Member
386 posts

Joined: Jan 2006
From: between 0 and 1
CM PSU ok or not eh... got new stocks.. RM100+ only, that's the cheapest i know...
« Next Oldest · Overclockers United · Next Newest »
 

138 Pages « < 111 112 113 114 115 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0181sec    0.36    6 queries    GZIP Disabled
Time is now: 3rd December 2025 - 01:20 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.