What did u meant by that? Whats ur vcore and clock speed at that time?

haih.... Celeron 420 not OC able wif GA-945GCMX-S2... not in the mood to try on other mobo d... gonna get E2160 to wait for Penryn...

vcore 1.29 at 2.4ghz..whats wrong ah?is it normal?idle temp is 47..after run orthos test cpu stress..jump up to 70-80 degree..thats hot..

This post has been edited by fesick: Aug 11 2007, 07:13 PM

wow... i haven't done tat test yet... been bz lately...

super_PI..?

hope can see ur guys result..

ermm..meaning?cedar mill is better or conroe is better?due to cache?

I wanna as something... Planning 2 buy e2140..
Question is can i use e2140 with crucial ballistix tracer ddr2 1066mhz...?
Coz the e2140 fsb is only 800 mhz..
Getting with GA-P35-DS3 also..

I don't see a reason why no.
U can always play with the divider, it isn't a must to run at fsb:dram ratio 1:1

damn motherboard. Biostar TP35D2-A7 freakin' annoying.

it goes by 3:5 F:R ratio by default. so imagine how far can i OC la. aihhh.

well, i reach 2ghz so far and you know what - i'm damn suprised that my KVR DDR2 667 can do 416mhz! yup!! that's DDR2 832 already!

i haven't memtest or whatever la but seriously, if don't touch 2.6ghz then i'm really not happy la.

This post has been edited by goldfries: Aug 12 2007, 07:31 PM

that is hot i must say. try get a better HSf

WTH my DDR2 667 is now running at DDR2 916!!

EDITED : btw due to the above RAM limitation (stupid 3:5 FSB RAM Ratio) i'm now running 2.2ghz.

This post has been edited by goldfries: Aug 12 2007, 08:34 PM

aiya..goldfries..urs better than me..my ddr2 667 only run ddr2 812 now..4:5 divider..wooaaa..sad sad..by the way..my ram is patriot one..hehe..dunno what chipset lagi..

oops. 3dmark06 will hang when speed too high. oh well, darn. drop down the speed to 2080mhz damn ratio is still at 3:5.

i thought easy, Intel chipset. plop in the thing will be 1:1 by default. mana tau lowest it could go is 3:5

bro..whats the highers speed did u get just now?

2200 la. can do some tests but can't run 3dmark properly.

i'm limited by that ratio. if i could do 1:1 then the testing would be better.

now i feel like exchanging with P965 board.

mm..currently my speed at 2600mhz,can run 3dmark06 properly..if not because stock fan..might push more speed liao

This post has been edited by fesick: Aug 13 2007, 01:19 AM

err.... the Mushkins Enhanced basic in my shop can do 400 easily d... also reach 500 b4... no big deal... unless it's advance module chip... but loose stability at 550 and can't do further than 1200... the worst thing is... my Corsair XMS2 1GBkit(512MB X 2) does the same exact thing at half price... but wif tighter timings...

hehe. i'm surprised to see my KVR reach that. even my DDR400 BT-D43 also don't go that far.

this one, Kingston chip and Hynix chip. http://valid.x86-secret.com/show_oc.php?id=228449

ahh. no need to buy DDR2 800 already. yay.

edit:sorry..

This post has been edited by fesick: Aug 13 2007, 01:45 AM