Yo...all....

I've heard da new E2200 @ 2.20 came out oledi..... Asking 4 opinion here bout it.... If i sell off my e2180 n get dis new 1......??? Ok x???

Thankx....

Well... it might probably help u scale higher as you have a low FSB wall on your mobo

So... it means dat can go higher than my current OC rite now??? Like now is @2.75, if e2200 additional .20???





This post has been edited by rozz_1291: Jan 11 2008, 02:15 PM

I think it's better to change your board than the CPU for now.

Ya lor..... I think u r rite Its bcuz of my mobo lack of juice i cannot OC higher...

You should get a board which allows you to control voltages and that helps a lot There are lots of IP35-E for sale in Garage Sales so you might want to consider that.

how about Gigabyte P31-S3L ?

P31 is only a tad cheaper than P35 so why not get the better board with RM30 extra?

Anyways Celeron Dual Core E1200 should be coming out within the nxt few days. DID some google..they overclock well too ..1.6ghz --> 3.2ghz ...100% OC..hehe..keep in tune for that..if the E2xxx isnt cheap already

How about those E7100? There are so many series of CPU these days and I'm getting confused

the only difference i found between these 2 boards, is only the gb Lan which the IP35 had. while both overclocks well.


and the amount of cache? it did have impact on performance if it is only 512kb per core.

Hi guys,

I'm looking for the M0 stepping for the E2140. Can I know which week is famed for its oc-ability ? Need ur expert opinion.

Also, for those who wants to buy E 2160 and e2180, price drop expected around 21st jan, just to share some info.

basically, it's cherry picking. there's no way to tell a good M0 or a bad 1. Some has good M0 like claw, some has a dud.

basically, they 'should' easily go 3ghz, 3.2ghz is already an achievement

by how much?

Noted it. Thanks for the advice. I'll try to google some info later tonite.

I'm interested to try 3.2GHz type. But is it very mobo dependant ? I mean, let say if use Asus P5K compare with Gigabyte P35-DS3 ?

sparrowed, are you sure the difference is only about the LAN? Did you miss out on the chipset on both the boards?

---

Added on January 11, 2008, 5:19 pmMy OC-guru kucingfight also sells CPU. Perhaps you guys can get some from him

This post has been edited by clawhammer: Jan 11 2008, 05:19 PM

my mistake. feature wise, both are almost same. P31 is basically a strip down version of P35, performance wise, dont think any difference between P31 and P35.

im looking for some cheap 2140 + either Ip35-e or p31-s3L mobo. he sells mobo also?

This post has been edited by sparrowed: Jan 11 2008, 05:24 PM

E2140 retails are already very cheap and it's basically a stripped down version of C2D's. My suggestion is to get a P35 chipset board (Abit or Gigabyte is up to you) and don't save that RM30 then regret later

I've been counting the days to 20th of January since last year!

Seems like some guys managed to grab it off NCIX already.

any cheap P35 boards will do, DS3, IP35E etc. The FSB wall on E2xxx will always be a limit. (pressumely u've got good HSF, PSU etc
IMO, scaling above 3.2ghz is tough, even tho it's possible, the heat output/+Vcore isnt economical for 24/7.

sorry i don sell e2xxx anymore..lol..it's a one time thing. yup, nothing much between P31 & P35.