Jan 15 2020, 08:39 AM
QUOTE(danielisme @ Jan 14 2020, 02:24 PM)
My one was manufacturer 2013 but gear box was changed to 2014 version due to gearbox failure in 2014. My time consider lucky becos they changed the whole gear box for me ( 2014 ) but after that they just repair .Bear in mind
VW car problem not only from gear but also other parts too and many of their service Center also are lebih Kurang attitude
Parts easy spoil are regardless tsi or non tsi
Such as aircond compressor and motor fan , absorber , air valve , mechatronic , radiator pump and hose .
VW will follow Suzuki fate
all 3s Center will close one by one
5000km engine oil top up is common if u Rev a lot and highway . If the engine oil drop every 1-2k km
Then good luck to u it may need to overhaul engine or turbo which is cost rm10k and above if both have problem
I heard from a friend (mechanic) who has another friend which is VW dealer, don't dare to go office and everyday headache because got fucked upside down by customers everyday.VW car problem not only from gear but also other parts too and many of their service Center also are lebih Kurang attitude
Parts easy spoil are regardless tsi or non tsi
Such as aircond compressor and motor fan , absorber , air valve , mechatronic , radiator pump and hose .
VW will follow Suzuki fate
all 3s Center will close one by one
5000km engine oil top up is common if u Rev a lot and highway . If the engine oil drop every 1-2k km
Then good luck to u it may need to overhaul engine or turbo which is cost rm10k and above if both have problem
Even received plenty lawyer letters. Think he's gonna give up VW dealership soon.
These conti are designed to fail. A water pump in a Japanese car is made of solid aluminium, can run well into 300-400,000km range.
Conti water pump is made of plastic housing, even rotor blade too
How could you use plastic in a place of high heat, constant pressure and vibration and expect it not to fail ??
So their engineers have planned the failure of material ahead, the water pump sure fail right about 5years.
Mechatronics unit controller board which is an electronic board constantly get cooked by hot temperatures 80-100°C due to hot gear oil you think can last how long ?
Quote
0.0163sec
0.81
6 queries
GZIP Disabled