Author's Note: The full review can be found here. My review blog for my other reviews: jwtechreviews.com



Thanks to Acumen for sending over their latest Acumen XR10 digital rearview mirror dashcam for review.


Technical Specs:
• Processor: Mstar8339D
• Sensor: Smartsens SC2363
• Viewing angle for front: 140° wide-angle lens F1.9 aperture; for rear 100° wide-angle lens F1.9 aperture
• 9.66″ IPS 1289×320 touch screen
• Resolution: front & rear 1080p 30fps
• Built-in 500mAh lithium-ion battery
• Reverse camera (require wire tapping)
• GPS module (optional)
• ADAS (LDWS)
• Parking mode


The box





Open box



Contents

• XR10
• Rear camera
• Rear camera cable
• Rear camera mounting tape and screws
• Car charger
• 16GB micro SD card
• Micro SD card reader
• Silicon mounting straps
• Pry tool
• Wire tap
• Cable holders x5
• Microfiber cloth
• User guide


XR10






Rear camera





Rear camera cable




Rear camera mounting tape and screws



Car charger



16GB micro SD card




Micro SD card reader




Silicon mounting straps



Pry tool



Wire tap



Cable holders



Microfiber cloth



User guide


More pictures of the full user guide here.


Initial firmware out of the box



Test setup

Using a 64GB Netac Pro micro SD for the recordings


XR10 interface



Videos
The front camera recorded in 1920×1080 30fps with an overall bit rate of 12.3 Mb/s.









The rear camera recorded in 1920×1080 25fps with an overall bit rate of 12.4 Mb/s.









Final thoughts
The XR10 is a really cool digital rearview mirror with a dashcam and reverse camera function.

Didn’t test out the reverse camera function as a need to wire tap to the reverse light to engage the reverse camera function. The rear camera is waterproof so you can mount it at the rear of the car.

The first time I liked a rearview mirror dashcam for its digital rearview mirror feature but I still don’t like the front camera lens is at the far left as here is right-hand drive.

This post has been edited by blurjoey: Jan 11 2020, 10:07 AM