Presenting....

DFI Lanparty P35 T2R [DDR2]


*Courtesy of xtremesystems


DFI Lanparty P35





Interesting eyh?

This post has been edited by sHawTY: Jul 14 2007, 09:18 PM

nice layout.. but yucky green color

3 pcie 16x slots?

Good question.
I'm asking the same question to myself also.

l0oks like cheapo board to me..

interesting protruding cooler.
Probably following nvidia's step? tertiary display.

Okay, here's the thing about that huge heatsink on top of the southbridge.
Actually, you can put that huge heatsink in two places.

As you can see in the 2nd picture, it's on top of the southbridge.
However, you can also move that huge ass momma heatsink and fix it on the PWM / Mosfet heatsink.

Cool?

maybe in future they going to introduce 3x graphic cards?
The background color of the mobo is nice as usual, it's the green colour that spoil the whole mobo.
Is there a price tag yet?

Let's make it simple on the price tag.
The price won't be lower than RM1K.
Trust me.

i 2nd that.. the heatsink@heatpipe cost a bomb..

but this mobo great la.. 3 pcie.. one for physicX lor.. apa lagi..

green maybe the effect of uv sure nice la..

lol...but from the looks of it, it's like a Biostar T965
looks cheap price cheap but good oc

Dream on skin tube.

i'm hoping for a Dark Infinity for P35.

Dream on, that is something that wouldn't happen.

the 1st pic is for ddr2 and the 2nd pic(with green color) is for ddr3? when is this board gonna release? i heard rumors say that is going to be out at end of july or august i think

This post has been edited by intothefantasy: Jul 14 2007, 08:48 PM

aahhh, the other thread can't see the 8-pin power connector , now i know where it is... , well... IMO, not bad la with those green/yellow color... besides, it's DFI, regarding 3 PCI-e slot... maybe we do have option to decide which slot we can use? all 3 slot @16x or even 32x speed?

Impossible. Intel P35 chipsets only support crossfire at 16X & 4X.
To intel hardcore users, correct me if i'm wrong.

my bad then... , well it's just blindly theory though...

The 1st pic yes it's for DDR2, but i'm not sure about the one in the 2nd & 3rd picture either it's using DDR2 or DDR3.

any 1 know this p35 board can do about 630 fsb when just using beta bios?
x38 lanparty is coming oso may be will be the high fsb monster!!!
but i think no rm1k in pocket dont dream to buy these new line of lanparty...

Read it, and weep it.
This board manage to do 632FSB on Sub Zero.

Where did i get such info?
Here: http://www.xtremesystems.org/forums/showth...t=oskar+P35-T2R

Fully 16x 16x only in X38 shipset. 16x 4x in most P35 mobo for crossfire is useless coz of bottlenecks at 4x.

heh...at one glance the layout looks alot like the reference n680i motherboards

and whats with the floppy connector location? first time ive seen DFI place their connectors like that...

This post has been edited by mADmAN: Jul 14 2007, 10:06 PM

why?
DFI not planning for an infinity for P35?
who's gonna replace P965-S?
or maybe we will have to wait for a long time like the P965-S.

This post has been edited by Skylinestar: Jul 15 2007, 09:18 AM

i think there will be some lower end mobo from dfi but likely will be late
cause heard that DFI now lack of BIOS writer can now truly concentrate on their new lanparty....

I think they would've release infinity series after done tweaking with lanparty .

You see DFI makes DFI Infinity P965-S, did they do DFI Lanparty P965?
Nope.

You see DFI makes DFI Infinity 975X, did they do DFI Lanparty 975X?
Nope.

You see DFI makes DFI Infinity 650I, did they do DFI Lanparty 650I?
Nope

You see DFI makes DFI Lanparty 680I, do you see DFI makes Infinity 680i?
Nope

You see DFI makes DFI Lanparty CFX3200, do you see DFI makes Infintiy CFX3200?
Nope

You see DFI makes DFI Lanparty 915, do you see DFI makes infinity 915?
Nope

You see DFI makes DFI Lanparty 925X, do you see DFI makes infinity 925-X?
Nope

Once they've made a model for a chipset, they won't make a cheaper model motherboard using the same chipset vise versa.
That's the clever DFI marketing stratergy.

They will only use one chipset for one model of a motherboard.
It has been like that for ages.

Yeah, in the past, maybe in socket 478 era and socket 939 era, they do use the same chipset for many motherboards, but not anymore.
Trust me, there won't be any DFI Infinity P35.

This post has been edited by sHawTY: Jul 15 2007, 11:43 AM

There's too much "nope". Probably its true for the sake of DFI.

It's true, i'm not talking trash, if anyone doesn't believe in what i said up there, google up in DFI website, then you'll see either i'm telling the truth or just giving craps.

Whoops.

Yeah, semantically, but they do.

That's AMD.
I'm talking about Intel LGA775 boards.

None of the board i've mention up there is for AMD.
Do you see any board i've posted up there for AMD?

This is the Lanparty CFX3200 i'm talking about.
http://us.dfi.com.tw/Product/xx_product_sp...TYPE=MB&SITE=US

I never mention AMD.

Eitherway, if you still on your point, do you see any Lanparty CFX3200 for AMD?
And do you see any Infinity CFX3200 for Intel?

The answer is no.

This post has been edited by sHawTY: Jul 15 2007, 04:44 PM

I know, but poking fun is #1 priority @ LYN.
Actually TBH, they would actually stand to gain more IF they had 2 versions.
Look at Sapphire's AM2 boards. 2 versions, 1 in white for rich enthusiasts and 1 in blue/black for poor ones. They could reap awesome margins on the white and get multiple buys/moar profit for the blue/black. And with BOTH boards proven to OC nicely.

Still I know DFI's profiting like f'in crazy from the new OCing trend, LanParty or Infinity.

[BTW heat output from the new Intel chipset series (to need hyper heatspreaders/heatpipes) is rather frightening.]

We will see if DFI's Intel chipset can shines like previous AMD's days.

Yes it will, don't you see the performance of DFI Infinity P965-S? A cheap motherboard compared to other intel P965 chipset motherboard such as ASUS Commando, Gigabyte GA-P965-DQ6, but, the DFI Infinity P965-S performance outwit all other P965 chipset based motherboard.
Does that not intrigue you on the performance of DFI's Intel chipset based motherboard?

Yes to me.

PhysicX is PCI slot not PCIE, 2slot CF Setup & another slot is for ATi physics that... That a old news d, so far never seen any ppl using it....

Because nothing has been developed with the next-gen Havok FX middleware yet. It's as simple as that.

But for Folding@home, should help out some.

This post has been edited by X.E.D: Jul 15 2007, 08:44 PM

Nope, Physicx for ATI uses PCI-e X16 slot.

Opps my bad all the while i think it's PCI .....

great layout on this 2 motherboard man and thanks for the information sHawTY

But from what I'm reading over in TW discussion, there maybe a Infinity for P35 which may have a cut down spec of:

1. Normal PWM
2. non-Bernstein Azalia audio
3. 2x PCI-e slots electrically
4. Single Gb LAN

Has happened before during the nForce 4 era and I don't see it not being done again if there's a demand for it

That might be possible coz not much ppl can buy over RM1k mobo. Cut down version should not hurt your wallet.

Nahh, my votes stand still that there won't be any Infinity P35

actually i'm quite curious about the design...

see,if i SLi two fire dragon 8800,it will produce a lot of heat,that time,the heat sink will absorb the heat from the 8800,isntit a big trouble? (regarding 3rd pic)

Err, we not talking about the unofficial SLi support aren't we? The situation you describe regarding heat produce by two graphic card whether the heat sink will absorb the heat from, is yet to be known.

i think that the big tower can be place at the pwm area with opposite side of processor
so i think it can be placed external and may be can use the psu fan for cooling

Then what you think the Infinity lineup is going to be? Historically DFi's used Intel chipset for their lower line mobo's anyway. Or you want me to trawl out the lineup of Infinity to confirm it?

Truth is the minimum requirement for Penryn, unless NVIDIA confirms a BIOS flash will allow their 650i chipset to be compatible, is P35 so like it or not, I can bet my pinky finger that there will be a P35 based Infinity

intel still have a new chipset call p31
no ddr3 and likely is a upgrade version of 965

shawty, r u going to bulk this??? seems very interesting though... personally i think those connector do seems nice but the heat sink is a bit too much...

Bulk?
No lah, just introducing new interesting motherboard to the market only, manada buat sales.

hope that DFI will introduce low budget P35 mobo like Infinity P965-S

P31 can GTFO for all I care since that's for HTPC users and I'm not that old yet to enjoy the benefits of HTPC

so P31 will be all in m-atx platform?

I know one thing about these new DFI Lanpart boards.

I bet the f***ers will hang and cold boot the minute you put in some fancy schmancy RAM or decide that you want to change the configuration a teeeny weeeeny bit. Then just like magic after punching it around abit, it'll start working fine after 3 days.

Damn i hate lanparty boards.

yes, everybody loves lanparty boards

havent see any p31 in m-atx yet
gigabyte p31 is in atx also

First review of the P35 LP by andreyang courtesy of XS

http://www.xtremesystems.org/forums/showthread.php?t=153578





And shawty, did I or did I say it that there will be an Infinity using P35 chipset?

This post has been edited by almostthere: Aug 3 2007, 03:13 PM

sweet board with huge @ss custom cooler. the price will be nice too. i like the green slot but why.. why... mix in yellow? all green or all black please, DFi...

Takde pun, manada.

LOL.
Yela yela, kan aku dah cakap aku salah dalam thread tu.
Hampehs betul la ko ni.

hell this lan party 1 looks much better than the infinity

Offcourse it is.
It's a "Lanparty" mah.

Maybe because lanparty looks too normal.
So, in order to boost the sale of lanparty, they make infinity ugly.

Me, almostthere & empire23 is aiming for this.
Still waiting for any distributor that has stocks in hand.

Once i got the pricelist, i will open the bulk for this motherboard!

But still the PCB is black+all solid caps and additional "PCIe 16x" slot. Make it looks expensive

I know the market price for this motherboard.
It isn't that expensive actually.

Just wait for me to open a bulk order for it.

Oh really! The price should be sub RM1k then...

lol guys, wait for x38 laahhh...

hahaha, shawty tk tahan liao.. wanna bulk oredi... any clue for the cost???

if shawty says not that pricy makes me wonder how much is it exactly?

to me maybe expensive to him cheap how?

No hints are allowed.

Hey, hey.. had been controlled by supplier ke?

Interested to know the bulk price here also

Nope, i'm hiding it because of myself, not because someone told me so.

Hope u know the future price for X38 LanParty too...

Rich bashtards
I'm stuck with orange crossfire untill the end of Phenom.



Just a sideline: If your mobo is covered by so many components and cables, how much of the mobo is actually gonna show up?

i want to wait for x38 mobo however this lanparty mobo look damn nice n tempting lar hehehe shawty tell me the price for that mobo lar

Hoho, pancing Shawty.. haha

ahaha kene pancing lor bagi sangkut trus kat hook tu ahaha

Now let's see how much this is gonna cost. If it's around 700-800 bux I'm sold



DFi LP P35 LT

http://beareyes.com.cn/2/lib/200710/10/20071010283.htm

This post has been edited by almostthere: Oct 18 2007, 12:10 PM

if u know where to get that locally, lemme know

tempting....x38 is out ... it is like one after another.. but i heard the performance is not much different between x38 and p35 for now..

im planning to buy lanparty p35 n paired it with e6850....is this board can performs OC very well??

So how many layer PCB it have ar...
Price should be above rm600 ler.

The Dark P35 T2R saw got forumer selling RM600, it's 4 layers PCB though.

The UT version not sure.

anyone found any seller from this forum?

Yeah any bulk starter come in and let us know....except ahem SxxxxxBxxx..

Here, DFI bulk

http://forum.lowyat.net/topic/522936

Owh...if we can do 600mhz bus on this mobo with Air Cooling...

780I mobo better le...pci-e 16x even in SLI or Triple also 16x ..normal other mobo when sli will become x8 to each

Izzit 780 identical to 680 juz a little mod? I heard someone say wait for 790?

The highest it can go with QX6800 cpu is 485mhz but aside from this, you can still reach FSB 550 to 580 if your cpu can make it.

ek

Seems to have a great potential in OC-ing this mobo..

i doubt can, hm...use cascade
Now those enthusiast mostly is playing their QX9650, seldom see QX6800/6850
windwithme dude still using QX6800 testing right.

Yah...u are right.