time machine still have NG Akatsuki for RM214 as for yesterday..
and they still have lots of it in stock..

NG..not to misuderstood with MG..there s is not MG akatsuki.

IWSP is no more at TM but last time they sell it for 135
and Noir is 148
RX OYW is 110

i know which shop will have zaku v2 first later on in msia..lol
and already can estimate that they will sell it for RM150 and above..

after this shop has it..then TM will arrive their stock a week later..with a price cheaper about 8 to 10 bucks..lol

just spray the whole inner frame gold..thats it..
or if you wanna make it nicer a bit..spray black first then only go for the gold.

there is different between normal and full burst..
the expose part are abit more shinnier while the one under the armor are the same gold as the normal version.

wetty means you either spray it too close to your surface or spray it too much already..

and yes..topcoat do smudge your marker lining..if you spray the topcoat to much
try to spray a thin layer first..and wait till it fully dry..and spray another layer after that

gold spray from mr hobby is around RM26- RM30
gold paint around RM6
and gundam gold marker around RM9 - RM14

and yes..its possible to color ur SF with just a marker..lol..it just the surface wont be even and also you will be wasting alot of those marker..

the best way is to go get the spray can..dont care tamiya or mr hobby one..
one can can cover the whole SF inner frame already.

like i post earlier just now..topcoat around RM26-RM30
and time machine at BTS has it for RM30

MV never sell topcoat..not in any of the toys shop there..

for those armor to have those rivets..you can drill a small hole

topcoat are spray after your model are fully complete with decals and paint..means topcoat are at the final step of completing your gundams.

sandpaper can get from hardware store..it just a sandpaper..wont melt your plastic also..lol

those thick markers are oil base and are meant for coloring large area..
theres also a water base markers..but its hard to get localy..this one are perfect for lining also..and easly wipe off with tissue..

hmm..its almost the same gold as full burst version..only not as yellow..
its more lighter and less yellowish..

and yes..you just shake and spray straight..not sure if you put into warm water first the can..the spray will be nicer or not..just like you do for topcoat can..

but whatever also..if you spray with whatever gold also..i will look nicer than the gold plastic color of the unpainted gold part of normal SF

my SF spray with mr hobby gold paint



This post has been edited by VincC454: Apr 29 2007, 10:12 PM

what you mean only got wing and strike for PG..
there is a lot more PG out there

http://www.dalong.net/review/pg.htm

or izzit you mean locally only sell those two pg only? but here also..TM sell many other PG also what..

it is recommended not to spray straight on the runner..it will leave you a cutting mark later.

spray black first or spray gold straight that one up to you..its better for you to test it somewhere first before actually doing it on ur SF.
spray straight gold also is no harm..but just dont do it on the runner..

^ yes..it been AB..

and for the lighter fluid..i use it to mix with my enamel paint..for lining

clivengu

yes..
at that time..its better just to use eraser..and that also better wait till the paint really really settle with the plastic first..

fyire

i dunno wo..i just use enamel for lining only..eaiser than use a marker..
never use it with AB before..most of the time i just use oil base paint with AB

This post has been edited by VincC454: Apr 30 2007, 09:55 PM

feel like those fluid can strip almost every type of paint..like those hardware thinner..

just feel like it la..never try it before also..so i might be wrong

char zaku not yet out..even the zaku v2 also never arrive msia yet..lol

just some info

zaku v2 and also hg acguy already arrive at xl
price still unknown..will update later once i got the price..
dont expect them to be cheap also..lol

it wont look like a painted with those topcoat even flat..

but it still look nicer then untopcoat gundam as the palstic look less toyish and less plasticky shinning..lol

i talking about flat topcoat..and i type there very clear also..

topcoat got three type..gloss, semi gloss, flat..

TM also selling those tamiya cutter for around RM80

but it just a cutter..use those hardware shop cutter also good enough already

TM always stock up all of their 3 topcoat..
sell them for RM30
and one of the hobby shop at city square there also sometimes sell topcoat for RM24..forgot the shop name..not really friendly also the uncle there..lol

there is no real process of applying topcoat..its a spray can..so you need to apply them like you spray a spray paint lo..so meaning no need any kind of tools for applying topcoat

but you can always put the topcoat can in hot or warm water few minutes before you spray them into you kits..its make the topcoat spray more smooth

---

Added on May 5, 2007, 10:33 amnice one..
you should take more picture of it and post it at mecha showoff thread also..lol

anyway..drybrush all those brownish color on your OYW?

and also..current price of zaku v2 locally

XL = 148
TM = 130

only these 2 shops got it up till today

This post has been edited by VincC454: May 5 2007, 10:39 AM

no need to bother about that bloody shop..
wait for edison better or if you cannot wait..get from TM

yea right..bloody old auntie even worst than her son!

i assume you read my story from play.com..lol
you go in and just look around..you get scolded for that..damn
that DC (a.k.a Don't Come) if you enter their shop..you got the curse already..the curse that you been force to buy somehting from that bloody shop before you leave..or else they go around accuse you a spy or other shitty..

---

Added on May 5, 2007, 12:04 pmPMS or no PMS..that is one shitty shop we all should avoid..
and im not the only one complaint about that shop also..

she never bother you one at first..but try to go there often and never buy anything..just walk around see see..she remember you one

dammit..she embrass me first that day..sunday somemore..then i flame her back on the spot!

now this is really going OT already..back to gundam talking

This post has been edited by VincC454: May 5 2007, 12:04 PM

time to answer everyone question...lol

actually if you go to the bb plaza one..and they ask to go u p buy..actually the up one also belongs to them..i mean the 6th floor sg wang one..

can can
http://forum.play.com.my/viewtopic.php?t=8069&start=45

this one totally depends..sometimes one can can only last for 1 or 2 MGs only..depends on how heavy you spray it. but maximum usually just till 2 MGs if you spray the whole kit..even till its weapons..

hg about 3 or 4 like that..

sometimes..depends how deep the scratch is

hmm..three of the most famous kit that people buy..lol
next time post it at mecha showoff kay

and for the can..1 can show cover these three kit already..

at mecha showoff please..thanks

well..tell me how many people here already got wing custom..lol
and most of them always like to do the same post..spread the wing..open the arms..lol

then comes strike..all people recommend to get that one..why..cause it comes with the catapult also..lol