Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 Wiper, From ACE Hardware.

views
     
SilentForever
post Jul 16 2019, 11:45 PM

On my way
****
Junior Member
580 posts

Joined: Oct 2015
QUOTE(FusionXY @ Jul 16 2019, 11:07 PM)
Hi, does anyone of you bought wiper from ACE Hardware?

Does ACE Hardware carry PIAA, Dura Edge and Bosch AeroTwin?
Is it original when bought in ACE Hardware. Don't wanna get conned from buying fake products at a higher price.
Planning to go to ACE Hardware tomorrow in Penang.
I bought new wiper from MR DIY. Started juddering after 1 week of usage. Judders only when it's wet. No problem when dry.

Thanks.
*
Mine is also same. Smooth when dry and when wet judder like mad. Gonna clay and polish the windshield soon and see how. I will recommend NWB if u are using japanese car. Online got 1 seller selling cheaper in shopee.

This post has been edited by SilentForever: Jul 16 2019, 11:46 PM
SilentForever
post Jul 17 2019, 12:12 AM

On my way
****
Junior Member
580 posts

Joined: Oct 2015
QUOTE(FusionXY @ Jul 16 2019, 11:53 PM)
Hi, will buy if ACE Hardware doesn't have the product that I wanted.

Which wiper that you're currently using?
I drive Perodua only LOL.
Yours when did it happen? After fix or after a few days?
Mine after fix still OK until 1 week later the problem started.

I tried to clean with glass cleaner still no difference.

Thanks.

EDIT: I tried switching my Kenari 20 inch wiper to Alza driver side, no juddering smooth when wet. I suspected it's the blade problem already.
I liked the Hybrid Wiper Blade design. The passenger side no judder, only driver side which is very annoying, cannot focus on the road while driving.
Will survey out got which brand/type of wipers tomorrow in ACE.

Thanks.
*
Hmm.. I should try switching also to test. If it judder on one direction and smooth on the other, usually its the wiper arm angle. I check my wiper arm and linkage but no obvious play. (Car 12 years old) The way I check linkage is to lift arm away from windshield and run the wipers to see if it still smooth. I am using NWB but it is made in malaysia one. If u were to get nwb, get the hybrid version as that is made in japan and not the traditional frame. Any u hook wiper arm will fit nwb as it is oem for japanese car.


This post has been edited by SilentForever: Jul 17 2019, 12:13 AM
SilentForever
post Jul 17 2019, 11:40 AM

On my way
****
Junior Member
580 posts

Joined: Oct 2015
QUOTE(theanswer @ Jul 17 2019, 11:34 AM)
who else use wiper when it's dry?  bangwall.gif
*
When you are troubleshooting haha, but I always wait windshield full of water for the first wipe. If not like sandpaper. But no use also now because previously using for 10 over years (not by me) and windshield has many fine scratches
SilentForever
post Aug 26 2019, 06:01 PM

On my way
****
Junior Member
580 posts

Joined: Oct 2015
QUOTE(FusionXY @ Jul 16 2019, 11:07 PM)
Hi, does anyone of you bought wiper from ACE Hardware?

Does ACE Hardware carry PIAA, Dura Edge and Bosch AeroTwin?
Is it original when bought in ACE Hardware. Don't wanna get conned from buying fake products at a higher price.
Planning to go to ACE Hardware tomorrow in Penang.
I bought new wiper from MR DIY. Started juddering after 1 week of usage. Judders only when it's wet. No problem when dry.

Thanks.
*
Any updates? Did u manage to fix the issue? I clay and polished my windshield but still same judder on driver side. Thinking of replacing the arm on the driver side to see..

This post has been edited by SilentForever: Aug 26 2019, 06:01 PM
« Next Oldest · The Fast & The Furious · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0188sec    0.42    6 queries    GZIP Disabled
Time is now: 15th December 2025 - 02:26 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.