Im using unifi air with B618 router,
Mostly my upload speed get around 50mb,
Just recently it go down.
Does TM capping the speed?


Attached thumbnail(s)

Midnight No people use it, so OFF it loh, save elec money.

WOW, Unifi air Download 100mbps, so great.
Early this month i try my hometown, 1mbps around, midnight up to 5mbps.

It will not consume so much of electricity la.. Moreover, not sure by doing this will reduce the lifespan or not.

past 2 days line is shit, heavy packet lost to ping test to google, but signal is full 4g bar... anyone facing problem?

Cause my living house goverment low cost unit, HOT abit, and i did not using Aircond, so need to take care all elec unit.

Wow! So never in your mobile phone?

im using 2 phone, all prepaid
use mifi more jimat than subscribe 2 internet data

Base on the B618 power consumption, switch off at night save you few cents only a day

Great idea !
Which one better, e5788 or m1 ?
You’re using Digi i150 with it?

Looking to try your combination ...

Not much savings on your electricity bill by turning your modem off every night. Just like printers when on standby, consumes very little power.

for me, m1 too bulky & heavy ; 5040mAh
e5788
performance almost same bcoz cat16

Difference between Huawei E5788 and Netgear Nighthawk M1 – 4G LTE Mall
https://www.4gltemall.com/blog/difference-b...r-nighthawk-m1/

Wahahah, that true also.
Seen when i not around home or went to sleep, i will off PC and router those electric unit. Been habit start from young till now.

When start up B618 it will connect Digi i150 with Band 3+7 with 4G+ LTE.
But WebUI top right sometime show Band 3 or 7 only.
Normally will jump to Band 7 with 4G+.
If WebUI show Band 7 with 4G+, speed around 40mbps.
If WebUI show Band 3 with 4G+, speed around 80mbps.
My place Band 7 slow, Band 3 fast.

So i need to apply Band 3 only and then apply again Band 3+7 for 4G+, WebUI will show Band 3 with 4G+.
Is that any way to make it always choose Band 3 for 1st choice with 4G+? or just need i manually click it?

Thanks for the info.
M1 bulky probably because of bigger battery capacity, so should be longer for usage .

noticed sometime no network for suddenly, but still can access the modem login just said unable to connect to network and red led. had to reboot ..not sure it's my b618 or local tower here problem.

Yesterday night 22/12 my home also facing disconnect a few time, each time DC around 15 second around. I didnot reboot router, just waiting.

b618 really hard to find.. b528 is 2nd on the list, is this any good?

local tower punya problem

b528 cat6
Support 4G LTE FDD: B1, B3, B7, B8, B20, B32. LTE TDD: B38

b528 is 2x2 mimo only right.. this affect network ka?