if u don't believe then assume it doesn't support band 20 for you then

This post has been edited by corihata: Oct 10 2019, 08:36 AM

because cellmapper database dont detect umobile band 20

I'm also surprised to see B20 in Malaysia. FYI, I can connect to B20+B7 with Digi too via the HManager app. The truth is, it omits B20 and only connected to B7. If you stick to B20 only it won't work.

we are not talking about digi

not every area have B20 so it's hard to say Whole Malaysia don't have B20 because ur area don't have

No need to be hostile, we don't owe you, if you don't tone down I will just send you for some break. https://en.wikipedia.org/wiki/List_of_LTE_networks_in_Asia Maybe the list is not updated, I'm not sure.

If I have the time, I will check with my engineers as we are the telco vendor for U Mobile.

[quote=fruitie,Oct 10 2019, 08:59 AM]
if u don't believe then assume it doesn't support band 20 for you then

[/quote]
I'm also surprised to see B20 in Malaysia. FYI, I can connect to B20+B7 with Digi too via the HManager app. The truth is, it omits B20 and only connected to B7. If you stick to B20 only it won't work.

[/quote]
how's the speed compared to b3 + b7 CA? stable as well?

B3 + B7 are way faster 130mbps
while B20+Any B around 60 max for umobile

Using HManager app, I can even connect to 3CA.

But I know it is not, sometimes I don't know how reliable this app is. However, it is good to toggle around for normal CA of B3+B7.

My area has no Digi B8 but it can be paired and connected with B3 or B7. If I stick to B8 only, it won't connect. So, the so-called CA I got connected was actually B3 or B7. I can differentiate from the tower ID I'm connected to.

Out of topic question

It Seems that you’re using digi infinite +b618.

Did you facing any ‘delay’ like 5-10 seconds when sending out message to other person via Whatsapp application? Usually this problem will happen around peak hour at my area like 7pm - 12am. I’ve No idea whether the problem lies only within network for my area or probably it’s normal for the digi network? Tried to put the infinite sim inside my phone (both android and ios) and the same problem happened. Speedtest seems normal, around 15-30mbps at peak hour and 60-90mbps out of peak hour. Other apps seems normal to load, youtube, netflix, webpage load instantly. It only happened for the Whatsapp application.

Yes, I'm using it. No, I don't seem to notice such delay but let me try to monitor tonight when I go back home. Update you later.

some screenshot of the hmanager or any familiar app showing your umobile is connecting to B20 would have been nice and contributive to the community

How to connect to B20? Lol
There's no toggle or selection for B20.
Someone enlighten me please?

HManager app has.

Sure, since u asked me nicely. u guys just acted like it's fake lol I'm not u mobile sales man. I was telling the TS so everyone can know about this

go buy a umobile sim and drive around test yourself if anyone have trust issue


Attached thumbnail(s)

I'm back at home and tested. No such issue. Messages were out instantly.

Not sure who's the one got triggered and shooting people around.
Also, learn how to quote a post properly, else every time someone replies to you will break the post. Thanks. I had to manually remove your quote when replied to this post, else it will break again.

This post has been edited by fruitie: Oct 10 2019, 07:26 PM

also I'm not sure why you're seems bit hostile towards forumers here? got grudge? chill la..

This post has been edited by GameSky: Oct 10 2019, 08:40 PM


Attached thumbnail(s)

is that b20? 5mhz tower only?

i thought it should be20mhz...

penang area got B20. or maybe city area will have b20. is rarely seing.

as told ealier. if u single band lock b20 got internet n reading stats mean b20 is available.

if u just use hmanager lock aka b20+b7 for CA, it's run b7 only which ever band is available. the CA shown just a visual effects.

I think that's a single band reading, there is no "+".

yea...

u also can force b3+b8 or b8+b7..

CA telco is not available for that..

even u can force it in hmanager, u still only will run either one of the band only.

I know, if you choose CA B3+B7, it will show 1800+2600 at the Cell Band. His is only 800 without + 2600 or 1800.