Hi bro, it happens to me anytime, regardless day or night. After two days observing, it don’t really happens every time after I lock with my alarm. Sometimes it goes off, sometimes it might be just fine like normal. I’m still figuring out the root cause..
u not affraid alarm bunyi rite. get a multimeter & measure volt before lock vs after.ring open bonet & cover the siren with few layer cloth.
Boss So far from Your experience can Intro best dashcam quality, durable and less maintenance? Front rear back old car. If possible want auto connect to my pc/hp for future purpose. Want got audio as well
Just got Viofo A119v3. So far so good. Just a bit confused with the parking mode. I set Auto detection Event and set motion to be medium sensitity while G sensor to highest. So this is the so call buffered mode right? My question is from the setting i done, does it record if there is impact or motion? Let say i only wan to record upon impact, then i should set motion to lowest sensitivity?
put lowest & shake ur car see got activate. increase lvl if unable
Any ddpai Z40 user here? Recently i bought ddpai Z40 dashcam. If i see the dashcam screen for front video it will pixelated. Cannot see the front car number also. When i complain to seller, he said is normal because the dashcam screen is more for do setting, will not support high resolution. Even i see the live video though ddpai app still the same for front video. The seller said not every phone can support 1944p resolution dashcam. I lower down the setting to 1080p but still the same. For back camera no issues. Just cannot accept the seller answer.
do u want to try copy file from memory card? live view & monitor might reduce quality for low bandwidth /processing. if memory card pun cannot see car plate. this dashcam useless ady. not even night scene
My A129 Pro Duo got stuck at the "Viofo" screen and recording light blinking. Totally unresponsive. This happened after parking under the scorching sun for about 1-2 hours. The unit itself was very hot to the touch and I suspect this is due to overheating.
I had to remove the cables and reconnect. It worked after that.
Is this a common problem and will getting a replacement unit help?
do test another memory card first. camera itself able tahan high heat