LYN Dashcam Discussion V2 | Dashcam Talk Malaysia, Everything related to dashcam!
|
|
 Apr 19 2019, 11:03 AM
Return to original view | Post
#1
|
 
Junior Member
330 posts Joined: Dec 2008 From: K.L, Kajang  
|
Hi, is there any1 using a dashcam with reverse camera type for 4x4 car like colorado?
Found something like Eagle Eye, not sure if quality is ok. https://www.lazada.com.my/products/car-vide...JjpySo&search=1 Budget around rm800 |
|
|
|
|
|
Jul 24 2019, 11:32 AM
Return to original view | Post
#2
|
|
Junior Member
330 posts Joined: Dec 2008 From: K.L, Kajang
|
I got the same problem with my A129 Duo IR as well where the video will have some pink at the top side and not clear at the rear windshield line.
|
|
|
Jul 24 2019, 12:16 PM
Return to original view | Post
#3
|
|
Junior Member
330 posts Joined: Dec 2008 From: K.L, Kajang
|
QUOTE(blurjoey @ Jul 24 2019, 11:48 AM) Are you using IR Auto mode for the rear cam? Try IR color mode instead. will try to adjust this. i currently setting it to mono mode. the color mode seems weird as the tree's green color turn purple The not clear part is because of the line and the tint. See if you can place the lens in-between the lines instead.   |
|
|
Jul 27 2019, 12:36 AM
Return to original view | Post
#4
|
|
Junior Member
330 posts Joined: Dec 2008 From: K.L, Kajang
|
just curious, could i remove the A129 IR rear cam and use the A119 dashcam as rear using the A129 IR rear cam micro cable to power
|
|
|
Aug 24 2019, 12:02 PM
Return to original view | Post
#5
|
|
Junior Member
330 posts Joined: Dec 2008 From: K.L, Kajang
|
QUOTE(blurjoey @ Aug 23 2019, 02:11 PM) 3 wires are to ACC fuse, Batt fuse, and grounding. While 2 wires are to either ACC or Batt fuse and grounding. so the fuse is dependent on the car u drive right?ACC fuse is to power the dashcam when the engine has started. Batt fuse is to power the dashcam when the engine is off. 2 wires if plug to Batt fuse for continuous power to the dashcam. But the dashcam won't know when to go into parking mode as it can't detect when the engine is off. That's why true parking mode uses 3 wires hardwire kit. But Viofo A119 v2 uses motion to detect and goes into parking mode when no motion is detected for a certain period of time. So what if there's non-stop motion and prevents the dashcam from going into parking mode? I saw there are fuse options like ATS, ATC, Mini and Micro2 |
|
|
Oct 16 2019, 11:02 AM
Return to original view | Post
#6
|
|
Junior Member
330 posts Joined: Dec 2008 From: K.L, Kajang
|
not sure is it my setting problem on the A129 Duo IR, i have recently bought the hardwire kit for it and was able to run ok.
Occasionally, when i enter the car, the dashcam will have beep sound and prompt to ask me wipe the sdcard. Any1 face this with hardwired A129 IR? |
|
|
Oct 16 2019, 04:22 PM
Return to original view | Post
#7
|
|
Junior Member
330 posts Joined: Dec 2008 From: K.L, Kajang
|
QUOTE(blurjoey @ Oct 16 2019, 11:04 AM) What micro SD card are you using? Samsung Evo Plus 64gb |
|
|
Oct 16 2019, 05:11 PM
Return to original view | Post
#8
|
|
Junior Member
330 posts Joined: Dec 2008 From: K.L, Kajang
|
QUOTE(blurjoey @ Oct 16 2019, 04:40 PM) Can you set the loop to 1 minute and see? ok try try see, tqOr can try to re-flash the latest firmware and see if this fixes the issue? |
| Change to: |  0.0380sec
 0.70
 7 queries
 GZIP Disabled
Time is now: 25th May 2022 - 03:08 PM |
Quote