Outline ·
[ Standard ] ·
Linear+
Computer internet
TSrocketm
|
Feb 22 2019, 09:50 AM, updated 6y ago
|
|
Hi all, I have few computer connected using a router so that the accounting software, printer and internet is connected to each other when can access to the software and printer (when one key in a transaction in one computer the other computer will have the record and view from another computer. So does the printer as it is not a wifi enable printer). However, I noticed that when Computer A is switched on follow by the turn on the internet modem. Then Computer A will not able to access to internet. I need to shut down or restart the Computer A then it can access to internet. The other computer does not have this problem even the internet is switched on when the computer is on earlier. Both the computer will have able to detect other wifi signal. It looks like this when connected to internet using router.
Can I know what is the problem why Computer A has the problem unable to access to internet and unable to detect other wifi signal? Thank you.
|
|
|
|
HonMun
|
Feb 22 2019, 09:59 AM
|
|
Logo seems like Ethernet more than WiFi
Try to pull out the LAN cable.
This post has been edited by HonMun: Feb 22 2019, 10:00 AM
|
|
|
|
ttan777
|
Feb 22 2019, 10:05 AM
|
|
probabaly clash of ip address
|
|
|
|
TSrocketm
|
Feb 22 2019, 10:07 AM
|
|
QUOTE(HonMun @ Feb 22 2019, 10:59 AM) Logo seems like Ethernet more than WiFi Try to pull out the LAN cable. If pull out the LAN cable then cannot access to internet and the accounting software.
|
|
|
|
brutalsoul
|
Feb 22 2019, 10:08 AM
|
|
ip conflict...ping the ip is it using the static ip ady...
|
|
|
|
TSrocketm
|
Feb 22 2019, 10:20 AM
|
|
QUOTE(ttan777 @ Feb 22 2019, 11:05 AM) probabaly clash of ip address QUOTE(brutalsoul @ Feb 22 2019, 11:08 AM) ip conflict...ping the ip is it using the static ip ady... If it is ip conflict then it should appear a message telling ip conflict but I did not see the message pop out before. How to check whether it is using static ip?
|
|
|
|
HonMun
|
Feb 22 2019, 10:53 AM
|
|
QUOTE(rocketm @ Feb 22 2019, 10:20 AM) If it is ip conflict then it should appear a message telling ip conflict but I did not see the message pop out before. How to check whether it is using static ip? IPconfig /all DHCP Enabled : ?
|
|
|
|
brutalsoul
|
Feb 22 2019, 11:01 AM
|
|
QUOTE(rocketm @ Feb 22 2019, 10:20 AM) If it is ip conflict then it should appear a message telling ip conflict but I did not see the message pop out before. How to check whether it is using static ip? win+r>>>ipconfig look for IPv4 Address
|
|
|
|
TSrocketm
|
Feb 22 2019, 11:04 AM
|
|
QUOTE(brutalsoul @ Feb 22 2019, 12:01 PM) win+r>>>ipconfig look for IPv4 Address The ipv4 address is 192.168.1.101 What does that means?
|
|
|
|
brutalsoul
|
Feb 22 2019, 11:11 AM
|
|
QUOTE(rocketm @ Feb 22 2019, 11:04 AM) The ipv4 address is 192.168.1.101 What does that means? u need to check other PC...is it the same with 101?
|
|
|
|
TSrocketm
|
Feb 22 2019, 11:16 AM
|
|
QUOTE(brutalsoul @ Feb 22 2019, 12:11 PM) u need to check other PC...is it the same with 101? The other computer is having 102 at the back of the ipv4 address
|
|
|
|
brutalsoul
|
Feb 22 2019, 12:41 PM
|
|
QUOTE(rocketm @ Feb 22 2019, 11:16 AM) The other computer is having 102 at the back of the ipv4 address let me recap: total 3 PCs; A = 192.168.1.101 B = 192.168.1.102 C = 192.168.1.102 Correct? release the IP then renew. Steps as below: https://www.tp-link.com/us/faq-840.html
|
|
|
|
TSrocketm
|
Feb 22 2019, 01:46 PM
|
|
QUOTE(brutalsoul @ Feb 22 2019, 01:41 PM) let me recap: total 3 PCs; A = 192.168.1.101 B = 192.168.1.102 C = 192.168.1.102 Correct? release the IP then renew. Steps as below: https://www.tp-link.com/us/faq-840.htmlThere are 3 computer in network. Computer A = 192.168.101 Computer B = 192.168.102 Computer C = NA ( in the network but not able to access to internet due to too old) May I know why do I need to do the ip release? Should the ipv4 address different for all the computer in the network? Is there any problem will occur if I do the ip release as this is the first time doing it. Later if all the network being disconnect then I will in trouble.
|
|
|
|
brutalsoul
|
Feb 22 2019, 02:08 PM
|
|
|
|
|
|
TSrocketm
|
Feb 22 2019, 02:16 PM
|
|
QUOTE(brutalsoul @ Feb 22 2019, 03:08 PM) The page is not found Can you copy and paste the content of that page?
|
|
|
|