Guys,

Appreciate some help on my problem.

I have TPLink Archer C5v (on Maxis Fibre) which I had previously had my Canon G3000 printer connected to it via wifi and all 5 PCs at home on the network can connect wirelessly to the G3000 for printing.


The G3000 went kaput recently and got a new e560 as replacement.


Went thru the installation process via USB cable, all OK. Test print etc, all OK


Then proceeded with the wifi connection method using WPS button on the router.

The wifi lights on the e560 printer show the right feedback following the step by step instruction HOWEVER it cannot be detected.

Have tried it using all 5 PCS that previously had worked flawlessly with the G3000 but it seems the


I logged into the router (as administrator) but am not sure where to look, to confirm whether the e560 is connected to it.

If anyone have any ideas, please give me some feedback. Thank you.

Try this :

1. Connection Using WPS (PIN code) :
https://ugp01.c-ij.com/ij/webmanual/Tutoria...L/trl-3006.html
>>> You will get a pin code printed on paper. Use this PIN to enter in the router's WPS setup.

2. Connection Using WPS
https://ugp01.c-ij.com/ij/webmanual/Tutoria...L/trl-3000.html
>>> Not quite work for me too.

The 1st method worked for my E560.

This post has been edited by mmohdnor: Feb 9 2019, 11:42 PM