They seem to just make things up as they go along.
The website lists the two fibre and the Streamyx packages and does not even mention any of the VDSL options

Anybody having trouble connecting to European servers today?

Speed is strongly affected by how many other networks are competing for the WiFi spectrum in your house

That was a useful outlet, busy but not too busy and could do everything.
Where else are they on the Ampang side of the city?

No usable LTE in my condo

I don't trust that 90 Mbps uplink figure, it looks out x10

Certainly in the long term as TM have a very limited pool of IPv4 addresses.
I sometimes find that I get blacklisted from legit download sites because too many TM users are being NATed through a few IPv4 addresses and it gets misidentified as bulk downloading

More that you don't get 800 Mbps or even 100 Mbps from a real world server

VDSL2 speed is mainly limited by cable length, not quality. Upgrading the copper to another copper type will make little difference.
My Unifi manages about 18Mbps, due to being about 500m back to the TM mux in the main MDF room.
TM are good at blaming the wiring in multi building condos, when the real problem is that they should have installed a second mux
https://www.versatek.com/blog/most-frequent...dsl2-questions/

I am getting about 390ms 50% ping packet loss to US sites
France 190ms 0% loss
UK 270ms 50% loss

Ping to the UK and US is much better this morning.
I think that a lot of US traffic was routed through the UK yesterday

Anybody else finding Mediafire much slower than usual?

I thought that the second POTS port TEL2 is not normally active, it was intended for a premium fax line service