kalau wiring to aircon better 15a and please dont loop from another socket for aircon

Hi ..I’m looking for an electrician too. Is the one that did for you ok? If yes, can PM me his number ?

Kaodim is a great idea - like ServisHero - but always seems to have the error message “we’re experiencing some difficulties, please try again later”
Is it business and financial difficulties?

Most of the times, new extra power points are looping from another socket. They will not do a fresh rum frm the DB. Imagine how much that will cost !

I was quoted 50 -70 per power point for plaster ceiling lights. Had so many to do, took a day off and did my self. For wall powerpoints in my yard. Hacked the wall and looped.
Of course you may not be able to diy.

Its cut throat, but wht to do !

It depends on so many factors on whether cutthroat or not..

Check the following:-
1) Cable size used and any brand? Or even SIRIM certified wire? Electrical shops do sell many brand and types of wire. Those good qualities one can cost up to 2x more.
2) Is it looping or pull from DB? For air-cond switch, pull from DB and not loop from another AC point.
3) Also be mindful if looping. Need to know if the wire to the 13A power socket is already overloaded or not. If loop too many points, it will be dangerous. If 2.5mm2 cable concealed in wall, it can only support about ~15amp.
4) How many quantities? Don't forget there is always a minimum cost. If 1 or 2 units only, of course it will be expensive as the contractor still need to cover for traveling cost, toll fees, etc.
5) There are also some contractors that will do improper installation to cut cost e.g. stitching multiple scrap wires, reducing wire size, and so on.

i think its your app ; everyone can use Kaodim no issue

Bump old tered... Wanna ask if today just call electrician to do a job.. typically how much?

It depends on what you want to do, there should be a travelling Fee then followed by a quotation. Now most electricians/renovators (in PJ) want cari makan only. They only want big jobs. Small jobs don't want. Plus only 3 in 10 will do it properly/nicely without BS.

This post has been edited by JON97: Sep 23 2024, 02:17 PM

depend what type of job, you are buying their knowledge/skill

reference only.

https://zulhelmiengineering.com/wiring-elektrik/

okay... the ones doing small job...also can tipu... i kena... 2 person come do job...1 instruct the other to do...charge me 2 person fee....
i was like wtf....straight away tell off the electrician

This is what happend to me too. Person A come see, ask person B come do. At the end bill makes no sense as it charge 2 person job.

Are these contractors on kaodim?

Depends. Hard to say.. Just make sure to pay on the platform.

Also, just from experience kaodim/ recommend.my both are good platform to find "contractors" but beware most of them like what I mentioned, Person A sees Person B do and those top rating contractors usually only do big jobs instead of small/ troubleshooting jobs, better $$.

Kaodim platform not already tutup kedai?

cheap liao lor, I call always kena rm150 minimum