Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

> Tint IR - 75% vs 85%?

views
     
iskazulka
post Nov 28 2018, 09:59 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


i use tint with these spec :
vlt 50%, uvr 99%, irr 78%, tser 39%. ok for me.

actually Ts, even though VLT 50%, from inside is still bright clear even at night.

This post has been edited by iskazulka: Nov 28 2018, 10:01 AM
iskazulka
post Nov 28 2018, 10:06 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(IMBeta305 @ Nov 28 2018, 10:02 AM)
yea still undecided.
And still waiting Anthony Loke reveal the new tinting guidelines
*
no need wait la. later pelanpelantunggu.com.my. current one is good enough. itupun only vlt saja.

front vlt 70%
side windows vlt 50%
rear vlt 30%

This post has been edited by iskazulka: Nov 28 2018, 10:08 AM
iskazulka
post Nov 28 2018, 10:10 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(mafioso @ Nov 28 2018, 10:00 AM)
oh im talking about the IR, not the VLT

as VLT, i can choose if i want it to be JPJ compliance (at least) or if i wanna go darker on my own is also ok.

now im just now sure if its worth paying for that extra 10% in question of our tropical weather

if lets say i pay 400 more just so that 10% can help cool my car down 30 seconds faster.. then i dont feel its worth it lol.

but if that 10% does impact a lot then i can consider the upgrade package hmm.gif
*
can go for irr75% with vlt 50%. won't regret one. eventhough mine tser only 39% but good enough when you compare inside with tint and put your hand outside.

This post has been edited by iskazulka: Nov 28 2018, 10:12 AM
iskazulka
post Nov 28 2018, 10:46 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(mafioso @ Nov 28 2018, 10:13 AM)
in that case

75% = 46% TSER
85% = 50% TSER

so that 4% worth to upgrade? laugh.gif for Rm400 ahahaha
*
mine 39% tser is good enough.
if you ask me, 46% is ok. rm400 go use for something else.


iskazulka
post Nov 28 2018, 10:47 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(mafioso @ Nov 28 2018, 10:45 AM)
oh damn, yes my car is leather seat.

so the 4% TSER does help a lot if its leather seats huh? hmm.gif
so recommended to put 70% for windshield?
4 windows = 50%
rear = 50%? (although can go 30%, but i am just a bit OCD haha)

meaning to say, 50% is quite dark already at night? lol
i also went to raytech and they told me its JPJ compliance. maybe i should ask them again on the saman thing tongue.gif
*
windshield must 70% vlt.
side windows 50% vlt max
rear 30% max

even mine 50% can see clear from inside.
actually you are the same feel like me before.

This post has been edited by iskazulka: Nov 28 2018, 10:48 AM
iskazulka
post Nov 28 2018, 10:49 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(mafioso @ Nov 28 2018, 10:48 AM)
i know but i wanna tweak it a bit by going either:

1. 70% front, 50% all around

or

2. 50% for the whole thing (rear/front/sides)

will the 50% be way too dark at night to not notice the interior and people sitting inside? or its okay? hmm.gif
*
jpj compliant must use 70% at front.

before
user posted image

new tint
user posted image

user posted image

This post has been edited by iskazulka: Nov 28 2018, 10:55 AM
iskazulka
post Nov 28 2018, 11:01 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(Zot @ Nov 28 2018, 10:57 AM)
It should be min instead of max  smile.gif
*
what i mean is max limit can go.
min 70% vlt.
max 30% vlt.
btw vlt term = visible light transmission levels.
lower number doesn't mean small number also.
i correct also.

This post has been edited by iskazulka: Nov 28 2018, 11:03 AM
iskazulka
post Nov 28 2018, 11:04 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(mafioso @ Nov 28 2018, 11:03 AM)
bro, i know JPJ compliance is 70/50/30

but what i meant was i dunno if i should go for 70%/50% for 4 windows + rear

or 50% for all windows including windshield and rear laugh.gif
so 50% is harder to see huh

in that case i may consider 70% then for front while 50% for every other window

as i often (actually everyday) drive through dark alleys at night due to bad lighting system around my housing area. sweat.gif
haha but that 30 secs was just my opinion, im not really sure on the difference how the 75-85% IR and 46-50% TSER come into play laugh.gif

thats why im asking if its worth or not.. its within my budget but if can save, why not laugh.gif
*
50% vlt front
1) harder to see at night, raining
2) hight chance kena tahan

your choice.

if ts still hard to choose, i think you should get inside a car with a same spec tint that you want.



This post has been edited by iskazulka: Nov 28 2018, 11:07 AM
iskazulka
post Nov 28 2018, 11:08 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(MR_alien @ Nov 28 2018, 11:05 AM)
i would say too small to tell
for me who is cheapskate, i would save that RM400 laugh.gif
*
let ts pening with choices.
we both already knew the outcome anyway. lol.
btw, mine's bias because also put soundproof. lol.

This post has been edited by iskazulka: Nov 28 2018, 11:10 AM
iskazulka
post Nov 28 2018, 11:12 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(Zaryl @ Nov 28 2018, 11:09 AM)
if put sunshades won't have problems with JPJ right?

save some money also if compare to install tint
*
you have to cabut sunshade when got jpj roadblock. because sunshade also non jpj compliant.
i done that before. in the end i also bosan because cabut pasang every times. put tint is better for me.
i already adjusting to 50% vlt, when guard want to see my face, i just roll down the windows la.
when at 10am or super bright noon, 50% vlt is actually visible from outside like using 65-70% vlt.

This post has been edited by iskazulka: Nov 28 2018, 11:15 AM
iskazulka
post Nov 28 2018, 11:19 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(Dineesh @ Nov 28 2018, 11:18 AM)
I was also so surveying on tints to replace for my car, then end up say got new guidelines so waiting for that news
*
pelanpelantunggu.com.my

you want to wait for all round 30% vlt ka?



This post has been edited by iskazulka: Nov 28 2018, 11:20 AM
iskazulka
post Nov 28 2018, 11:28 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(mafioso @ Nov 28 2018, 11:22 AM)
now i think again..

no point waiting because it wont go lower than 30% for sure. lol

either they will make it 70% for all (which will affect 95% of tinted car owners)

or make it 50% minimum

might even increase the rear 30% back to 50%
*
pandai.
so far current spec is good enough.
imo 70% front is a must, rest 50% at least.

actually the current spec is this.

70% for the front windscreen, 50% for the front side windows, and 30% for the rear windows including the rear windscreen.

This post has been edited by iskazulka: Nov 28 2018, 11:31 AM
iskazulka
post Nov 28 2018, 11:36 AM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(jmas @ Nov 28 2018, 11:33 AM)
I using compliant tint + this shade for back seat, never kena block

don't like shade for front seats, blocking view.
*
jpj will only inspect the front side only, because main point is driver's view.
that's why logic now can 30% at rear side windows and rear windscreen.

This post has been edited by iskazulka: Nov 28 2018, 11:37 AM
iskazulka
post Nov 28 2018, 12:00 PM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(Joe_Longgo @ Nov 28 2018, 11:57 AM)
What if all windows 75% but front only 15%. what are the chances?
*
you go to hell earlier than expected whistling.gif
higher blindspot.

This post has been edited by iskazulka: Nov 28 2018, 12:02 PM
iskazulka
post Nov 28 2018, 05:33 PM

Getting Started
**
Junior Member
62 posts

Joined: May 2012


QUOTE(2feidei @ Nov 28 2018, 05:20 PM)
oic....i pakai raytech. Consider gooding after 3 weeks pakai

But, in term of heat rejection, ok lah, quite fast cool down. Glaring reduction, ok lah, not perfect until no need wear sunglasses when sun directly right in front of u (front windscreen, higher VLT, less dark). Side one ok, quite dark, which I myself oso bit surprise, can pass JPJ meh, they conlanfirm say no problem. Ok lah, trust their word, plus they say if kena saman, bring the saman for them.

Workmanship so so only.......coz many foreign workers, less experienced, still in training. But, after service is good. Mine because the windscreen not properly cleaned, got 1 minor dot of dust, then, tint. Go complain, no question asked (initial I tot maybe haven't dried), straight away remove and re-tint (before that ask me got time or not lah, coz need about 30-45 min to do). Compare to other brand, famous one oso.....taichi manyak cerita..........

So, if u mau raytech, make sure u check their workmanship properly......

u mau more details about my tint, u pm me.....
*
it's all about brand and workmanship and after sales service.

if brand is good but the dealer workmanship or after sales is bad also consider bad.

finding a dealer who is trust able is hard to find.

This post has been edited by iskazulka: Nov 28 2018, 05:36 PM

Bump Topic Add ReplyOptions New Topic
 

Change to:
| Lo-Fi Version
0.0202sec    0.22    6 queries    GZIP Disabled
Time is now: 2nd December 2025 - 07:02 AM