Hi All,

I was wondering, if there any possible to Customize AIO.
Since this AIO is big hit over the market, but the expansion is little less than full custom watercool.

The initial idea was like this :

1. Normal ID-Cooling Frostflow 240.
2. Tubing.
3. Reservoir and D5 pump.

The purpose of this idea is for :

1. Increase the waterflow as it will combine Build in Pump and D5 puml.
2. Use different solution (liquid) for better heat transfer.
3. Cosmetic purpose, look good with lower budget.

Hope expert can give extra advice.

I am using it. So far so good.
Gtx 1080ti standard temp 31 degree c and maximum at 54 degree c.

Using heatsink was up to 85 degree..

Id cooling is nice. I buy all for RM260 only. But the fan cant fit. So i just use cable tided.

Highly recommend.

I play 2k 75fps games only.


Attached thumbnail(s)

you cool your graphic card with id cooling vga cooler, then how about your vram chip on graphic card? does you do anything to cool it or just leave it empty with just fan cool only? and can show some pic between the vram chip and block there?

The vram chip is attach to the heatsink only by using thermal pad. Only fan blow the heatsink.

So far no games can run 100% at the card.

Mostly 43% usage only. I feel waste..

I have another system running zotac gtx 1060 6gb. Only play 1080p games with Maximum setting. So far run up to 90% usage. On games like RE2 remaster, Farcry new dawn..

This is zotac 1060 6gb. I buy used 1.. RM530 only.


Attached thumbnail(s)

meaning that u use this kind of heatsink to stick on VRam chip only ??
because i also planing to upgrade my gtx 1070 to aio cooling also.
http://www.idcooling.com/Product/detail/id...STFLOW%20240VGA

It similiar to the picture u shows. But the id cooling vga solution do come with all the vram heatsink. And themal pad.. the only problem i got is the fan cannit fit the radiator. So i just using cable tide to tided together with the radiator. Since it only RM260 for that. With gtx1080ti... i get max temp is 65 celcius.

ok.... thank for your info

can i know the model of your ID cooling aio water cooler on your gtx 1080ti?

Frostflow 240mm

errr hmmmm errrr hmmm

custom aio = custom wc...

the term aio wc was always meant the pump+res was integrated either to the block to radiator.

ALL IN ONE.

Yup, no such thing as custom AIO, however there are AIO that are customizable like Fractal Design Celsius S24 / S36.

Those models you can detach the tubes and use with your own choice of hard / soft tube.

Yep, that the idea. To swap tubes and Rad.
Since the one come in box quite short.